Wilwood BP10 D2363 Brake Set with 0.62-Inch Pads

The D2363 backing plate and listed 0.62-inch thickness define this four-pad BP10 package. The set renews the friction components in a matching brake assembly, retaining the need to verify rotor material and the heat demand of the complete system. The brake-system manufacturer Wilwood Engineering was founded by Bill Wood in 1977 and is based in Camarillo, California. It designs and manufactures disc brake systems, covering motorsport, street-performance and specialized needs with calipers, brake rotors, master cylinders, valves, fittings and brake lines. Component compatibility must be assessed across the whole installation.

Technical Details

• Manufacturer part number: 150-10-D2363K
• Package quantity: 4 pads
• Pad thickness: .62 inch
• Rotor compatibility: Steel, Iron
• Pad profile: D2363
• Friction compound: BP10

Wilwood rates BP10 for low dust and low noise while providing a gradual friction response. It is usable on the street and in drag or light-to-medium dirt-racing duties with steel or iron rotors. Its moderate-temperature character should be considered before selecting it for repeated high-energy stops.

Fitment & Compatibility

Before ordering, compare the removed pad with the profile drawing and check the caliper’s allowed thickness. Confirm both retention geometry and rotor material rather than relying on a similar overall pad outline.

Reference: Wilwood BP10 compound characteristics.

For selection assistance, PMB Performance combines over 20 years of experience with a focus on the actual braking hardware. Share the caliper specification and intended use before ordering an uncertain fit.

WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.