This Sebro single‑mass clutch flywheel (rs style) (manufacturer part number 96410223931) is a direct-fit replacement for the Porsche applications listed in the fitment table below. It’s the right fix when you’re chasing a clean install and a warning-free dash—especially on cars where age and heat cycles make sensors and clutch hardware fail quietly.
Technical Details
- Manufacturer part number: 96410223931
- OE reference: 96410223931
- Type: Single‑mass flywheel
- Notes: Often used for dual‑mass to single‑mass conversions—confirm clutch disc/pressure plate compatibility in fitment notes.
Fitment & Compatibility
Use the fitment table below to confirm year/submodel and any notes. If your car has been modified or you’re unsure what’s currently installed, send us your VIN and we’ll help you verify fitment before you order.
We’ve been doing Porsche work for over 20 years, and we’ve learned that the “small” parts are usually what decide whether the job goes smoothly. If you’ve got a fitment question, reach out—we’ll get you pointed at the right part the first time.
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 1995 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; (European "RS" model); For conversion on models with Dual-Mass Flywheel must also use (Qty.) (1) 996 116 015 34 Disc: (1) 964 116 028 03 Plate: (1) 944 116 080 01 Bearing: (1) 950 116 813 30 Tube: (1) 964 114 143 31 Ring Gear: (1) 931 102 111 00 Bearing: (9) 928 102 151 01 Bolts: (9) 900 067 103 01 Bolts. |
| 1996 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; (European "RS" model); For conversion on models with Dual-Mass Flywheel must also use (Qty.) (1) 996 116 015 34 Disc: (1) 964 116 028 03 Plate: (1) 944 116 080 01 Bearing: (1) 950 116 813 30 Tube: (1) 964 114 143 31 Ring Gear: (1) 931 102 111 00 Bearing: (9) 928 102 151 01 Bolts: (9) 900 067 103 01 Bolts. |
| 1999 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; "Cup" Race Cars |
| 2000 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; "Cup" Race Cars |
| 2001 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; "Cup" Race Cars |
| 2002 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; "Cup" Race Cars |
| 2003 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; "Cup" Race Cars |
| 2004 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; "Cup" Race Cars |
| 2005 | Porsche | 911 | Carrera | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; "Cup" Race Cars |
| 1992 | Porsche | 911 | Carrera 2 | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; (European "RS" model); For conversion on models with Dual-Mass Flywheel must also use (Qty.) (1) 996 116 015 32 Disc: (1) 964 116 028 90 Plate: (1) 944 116 080 01 Bearing: (1) 950 116 813 30 Tube: (1) 964 114 143 31 Ring Gear: (1) 931 102 111 00 Bearing: (9) 928 102 151 01 Bolts: (9) 900 067 103 01 Bolts. |
| 2004 | Porsche | 911 | GT3 | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; Only for cars with Single-Mass Flywheel |
| 2005 | Porsche | 911 | GT3 | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb).; Only for cars with Single-Mass Flywheel |
| 2007 | Porsche | 911 | GT3 RS | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb). |
| 2008 | Porsche | 911 | GT3 RS | Torque specs for bolts (flywheel to crankshaft) = 90 Nm (66 ft lb). |