Fitment questions?
Call (855) 786-7101 or text (801) 304-3141.
Real people. Real answers.
Product details
The DENSO DOX-0414 Lambda Sensor is a heated, switching-type oxygen sensor that reads exhaust oxygen content and reports it to the engine management system on select 2005–2006 Land Rover Range Rover, Range Rover Sport, and LR3 models. It uses a finger-type sensing element, the design where a thimble-shaped ceramic element sits directly in the exhaust stream. Its built-in heater brings that element up to working temperature quickly, so the engine computer can use the signal sooner after a cold start. The sensor threads into its exhaust boss on an M18x1.5 thread, and DENSO supplies those threads pre-greased. A 420 mm cable runs from the sensor body to a 4-pin connection.
DENSO backs this oxygen sensor with a 24-month warranty.
DENSO's parts data shows this one sensor replacing five factory part numbers: MHK500910, MHK500820, MHK500850, 5H22-9F472-BA, and AH22-9G444-AA. If the sensor coming off your vehicle carries one of those numbers, this is the DENSO replacement for it. Because it is a switching-type sensor, its output flips between rich and lean readings and does not give the proportional signal of a wideband air-fuel sensor, so the two types are not interchangeable. The sensor weighs 94 g, which reflects its compact finger-type body.
Technical Details
- Manufacturer: DENSO
- Part number: DOX-0414
- Manufacturer name: Lambda Sensor
- Sensor type: heated, finger-type, switching-type oxygen sensor
- Thread size: M18x1.5, pre-greased
- Cable length: 420 mm
- Number of pins: 4
- Net weight: 94 g
- Replaces factory numbers: MHK500910, MHK500820, MHK500850, 5H22-9F472-BA, and AH22-9G444-AA
- Warranty: 24 months
Common Questions
Do the threads need compound before installation?
DENSO supplies the M18x1.5 threads pre-greased from the factory.
How can I match this sensor to the one I am removing?
Compare the part number on your old sensor with the factory numbers in Technical Details. The 420 mm cable and 4-pin connection give a second point of comparison.
Is this a wideband air-fuel sensor?
It is a switching-type sensor. It should replace a switching-type sensor of the same specification.
Fitment & Compatibility
Check the fitment table below for the models, years, and trims this sensor covers. Send us your VIN and we will confirm fit before you order.
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2006 | Land Rover | Range Rover | HSE | |
| 2006 | Land Rover | LR3 | HSE | |
| 2005 | Land Rover | LR3 | SE | |
| 2006 | Land Rover | Range Rover Sport | HSE |