Fitment questions?
Call (855) 786-7101 or text (801) 304-3141.
Real people. Real answers.
Product details
This DENSO front lambda sensor is a heated broadband air-fuel ratio sensor that reports exhaust oxygen content to the engine management system on 2003–2005 Jaguar S-Type, XJ8, XJR, Vanden Plas, and Super V8 models. DENSO classes it as an A/F type sensor with a finger-type element. A broadband sensor reads the mixture across a wide range instead of only switching between rich and lean, and its built-in heater brings the element up to working temperature soon after a cold start. The sensor threads in on an M18x1.5 thread that DENSO pre-greases at the factory. It has a 300 mm cable to a four-pin connector and a net weight of 95 g.
DENSO oxygen sensors from PMB Performance carry a 24-month warranty.
DENSO designates this sensor for the front position, so it is not the same part as a rear sensor on these cars. It replaces a group of factory numbers: C2C29250, C2C28250, C2C12588, 2R83-9F472-AB, 2R83-9F472-AC, 2R83-9F472-AD, and 2349030. Any of these numbers on a removed sensor or a parts invoice points to this DENSO unit. The range of superseded numbers reflects how many versions were used across the S-Type and XJ-series cars during these years, all now covered by one sensor. Matching both the cable length and the four-pin plug to the old sensor is the clearest physical check, since both are fixed on this part.
Technical Details
- Manufacturer: DENSO
- Part number: DOX-0428
- DENSO part name: lambda sensor
- Sensor type: A/F broadband, heated, finger-type
- Position: front
- Thread size: M18x1.5, pre-greased
- Cable length: 300 mm
- Number of pins: 4
- Net weight: 95 g
- Replaces: C2C29250, C2C28250, C2C12588, 2R83-9F472-AB, 2R83-9F472-AC, 2R83-9F472-AD, 2349030
- Warranty: 24 months
Common Questions
Is this a narrowband or broadband sensor?
It is a heated broadband A/F sensor with a finger-type element.
Does the thread come prepared?
Yes. DENSO supplies it with the M18x1.5 thread pre-greased.
How long is the cable?
The cable is 300 mm long and ends in a four-pin connector.
Fitment & Compatibility
Check the fitment table below for the exact models, trims, and years this sensor covers. Make sure you are ordering the front sensor position. Send us your VIN and we will confirm fit before you order.
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2003 | Jaguar | S-Type | Base | |
| 2004 | Jaguar | S-Type | R | |
| 2005 | Jaguar | S-Type | R | |
| 2005 | Jaguar | Super V8 | Base | |
| 2004 | Jaguar | Vanden Plas | Base | |
| 2005 | Jaguar | Vanden Plas | Base | |
| 2004 | Jaguar | XJ8 | Base | |
| 2005 | Jaguar | XJ8 | L | |
| 2004 | Jaguar | XJR | Base | |
| 2005 | Jaguar | XJR | Base |