{"product_id":"wilwood-170-0317","title":"Wilwood Rear 1.590-Inch-Offset Drag Hat for Eight-Bolt Rotor Rings","description":"\u003cp\u003eWilwood's 1.590-inch rear drag hat has a 3.06-inch register and threaded rotor mounts. Select the matching eight-bolt ring and mounting hardware. The manufacturer, Wilwood Engineering, was established by Bill Wood in 1977 and is based in Camarillo, California. It designs and builds disc brake systems with a range covering calipers, brake rotors, master cylinders, valves, fittings and brake lines. Motorsport, street-performance and specialized applications require components selected for the complete braking system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 170-0317\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Black E-Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting method:\u003c\/strong\u003e Fixed Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition in the specified brake assembly:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHat offset:\u003c\/strong\u003e 1.590 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor attachment interface:\u003c\/strong\u003e 8 x 7.00 inches; rotor attachment, separate from the hub flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub-flange mounting\/clearance pattern(s):\u003c\/strong\u003e 5 X 4.50, 5 X 4.75, 5 X 5.00 inches; verify the actual hub and wheel-stud clearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter register diameter:\u003c\/strong\u003e 3.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting hole\/thread designation:\u003c\/strong\u003e 5\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal clearance diameter:\u003c\/strong\u003e 6.14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting-face thickness:\u003c\/strong\u003e 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub-side hole clearance diameter(s):\u003c\/strong\u003e 0.520 inches; these are clearance dimensions, not wheel-stud thread sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-listed attachment hardware reference:\u003c\/strong\u003e 230-0233D; verify the specific rotor and attachment arrangement before ordering hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor-bolt clearance:\u003c\/strong\u003e The listed 230-0233D kit uses short-profile hex-head bolts for the solid-rotor drag assembly. Use 230-2589 only where the installation provides sufficient clearance between the rotor-bolt heads and caliper mounting hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer installation note:\u003c\/strong\u003e 3.06 \" diameter register with counterbore for register ring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent:\u003c\/strong\u003e Drag Brake Rotor Hat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eIdentify the installed brake conversion before choosing this hat for Drag brake systems. The offset, center register and attachment hardware must agree with the rotor and hub in that assembly. Select the rotor and attachment hardware separately for the documented assembly. Follow the installation drawing for engagement and clearance at every mounting point.\u003c\/p\u003e\u003ch3\u003eManufacturer Reference\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hats\/HatProd?itemno=170-0317\"\u003eWilwood component specifications and dimensions\u003c\/a\u003e · \u003ca href=\"https:\/\/www.wilwood.com\/Hats\/HatProd?itemno=170-5244\"\u003eWilwood 230-0233D \/ 230-2589 hardware-clearance reference\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eWith more than 20 years of parts and fitment experience, PMB Performance can help compare the existing brake assembly with the required component.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67730107269298,"sku":"170-0317","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Hat_Standard-xl_14ae5877-d1b7-4fa3-aa81-2616781cb547.jpg?v=1792172986","url":"https:\/\/pmbperformance.com\/products\/wilwood-170-0317","provider":"PMB Performance","version":"1.0","type":"link"}