{"product_id":"wilwood-140-17149","title":"Wilwood Front AERO6 Hub Brake Kit for No Limit ZG Spindles, Black, 14.00-Inch GT Rotors","description":"\u003cp\u003eThe 14.00 × 1.25-inch gt slotted rotors define this AERO6 front brake package for No Limit Engineering ZG Spindles. Wilwood supplies black 6-piston calipers for the specified installation, with the rotor width and mounting hardware selected as a system. Founded in 1977 by Bill Wood, Camarillo, California-based Wilwood Engineering designs and manufactures disc-brake systems and components. Calipers, brake rotors, master cylinders, valves, fittings and brake lines support motorsport, street-performance and specialized uses, with each component chosen in relation to the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 140-17149; supplied as an axle kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied friction pads:\u003c\/strong\u003e BP-20 compound; match operating conditions to the intended use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware and retained components:\u003c\/strong\u003e Mounting hardware supplied; wheel hubs included; spindles, master cylinder and brake booster are not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel envelope:\u003c\/strong\u003e 18-inch minimum nominal wheel diameter; verify the entire wheel-clearance drawing, including spoke and barrel shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor specification:\u003c\/strong\u003e Material: Spec-37 Iron; Type: GT 72 Curved Vane; Style: GT Slotted; Surface Finish: Black Electro Coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor hats:\u003c\/strong\u003e Aluminum big brake hat - flared bell; Black E-Coat; hat offset 1.470 inches. Hat offset is distinct from axle offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle modification:\u003c\/strong\u003e The No Limit ZG spindle ears must be removed and two holes drilled and tapped per DS1542; qualified machining required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic sizing:\u003c\/strong\u003e cataloged bore sizes 1.75, 1.38, 1.38 inches; piston area 5.40 square inches; inlet 1\/8-27 NPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic lines:\u003c\/strong\u003e Hydraulic flexlines and fittings are not included; select compatible lines for the complete installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded wheel hubs:\u003c\/strong\u003e 5 x 4.75 in; 5 x 120.65 mm; 5 x 5 in; 5 x 127 mm wheel patterns; 1\/2-20 studs. Check the selected pattern and bearing arrangement before assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService calipers:\u003c\/strong\u003e AERO6; 6 pistons per caliper; Black Powder Coat; radial mounting; stainless pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake rotor size:\u003c\/strong\u003e 14.00-inch outside diameter × 1.25-inch thickness; vented friction section.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFor No Limit Engineering ZG spindles only, DS1542 requires removal of the two interfering spindle ears plus drilling and tapping two holes. Both spindles need the specified qualified machining before brake assembly. Check wheel stud location, bearing adjustment and the full 18-inch clearance diagram. The supplied hubs determine the available wheel patterns; the spindle itself is not included.\u003c\/p\u003e\u003cp\u003ePMB Performance has over 20 years of parts experience. Share the VIN and any changes to the axle, upright or wheels before ordering if the brake configuration is uncertain.\u003c\/p\u003e\u003cp\u003eReview \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1542.pdf\"\u003eInstallation instructions\u003c\/a\u003e for the complete installation and clearance requirements.\u003c\/p\u003e\u003ch3\u003eManufacturer Warning\u003c\/h3\u003e\u003cp\u003eApplicable to brake pads only. WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67757527924914,"sku":"140-17149","price":2811.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-17149_kit-xl.jpg?v=1792450413","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-17149","provider":"PMB Performance","version":"1.0","type":"link"}