{"product_id":"wilwood-140-17149-dr","title":"Wilwood Front AERO6 Conversion, Red Calipers \u0026 Drilled Rotors with Hubs for No Limit ZG Spindles","description":"\u003cp\u003eRed AERO6 calipers provide the hydraulic service braking in this Wilwood front conversion for No Limit Engineering ZG Spindles. They work with 14.00 × 1.25-inch srp drilled \u0026amp; slotted rotors; the vehicle designation must be considered together with the mounting details below. Wilwood Engineering, founded by Bill Wood in 1977, is based in Camarillo, California. Its work covers the design and manufacture of disc-brake systems and components for specialized vehicles, motorsport and street-performance use. The product range includes calipers, brake rotors, master cylinders, valves, fittings and brake lines; compatibility depends on the complete system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 140-17149-DR; supplied as an axle kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle modification:\u003c\/strong\u003e The No Limit ZG spindle ears must be removed and two holes drilled and tapped per DS1542; qualified machining required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic sizing:\u003c\/strong\u003e cataloged bore sizes 1.75, 1.38, 1.38 inches; piston area 5.40 square inches; inlet 1\/8-27 NPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor specification:\u003c\/strong\u003e Material: Spec-37 Iron; Type: SRP Drilled Rotor; Style: SRP Drilled \u0026amp; Slotted; Surface Finish: Black Electro Coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied friction pads:\u003c\/strong\u003e BP-10 compound; match operating conditions to the intended use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded wheel hubs:\u003c\/strong\u003e 5 x 4.75 in; 5 x 120.65 mm; 5 x 5 in; 5 x 127 mm wheel patterns; 1\/2-20 studs. Check the selected pattern and bearing arrangement before assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake rotor size:\u003c\/strong\u003e 14.00-inch outside diameter × 1.25-inch thickness; vented friction section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService calipers:\u003c\/strong\u003e AERO6; 6 pistons per caliper; Red Powder Coat; radial mounting; stainless pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel envelope:\u003c\/strong\u003e 18-inch minimum nominal wheel diameter; verify the entire wheel-clearance drawing, including spoke and barrel shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor hats:\u003c\/strong\u003e Aluminum big brake hat - flared bell; Black E-Coat; hat offset 1.470 inches. Hat offset is distinct from axle offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic lines:\u003c\/strong\u003e Hydraulic flexlines and fittings are not included; select compatible lines for the complete installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware and retained components:\u003c\/strong\u003e Mounting hardware supplied; wheel hubs included; spindles, master cylinder and brake booster are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFor No Limit Engineering ZG spindles only, DS1542 requires removal of the two interfering spindle ears plus drilling and tapping two holes. Both spindles need the specified qualified machining before brake assembly. Check wheel stud location, bearing adjustment and the full 18-inch clearance diagram. The supplied hubs determine the available wheel patterns; the spindle itself is not included.\u003c\/p\u003e\u003cp\u003eWith more than 20 years of parts experience, PMB Performance can help compare your VIN and installed hardware with the required configuration. Include any suspension, wheel or axle changes.\u003c\/p\u003e\u003cp\u003eReview \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1542.pdf\"\u003eInstallation instructions\u003c\/a\u003e for the complete installation and clearance requirements.\u003c\/p\u003e\u003ch3\u003eManufacturer Warning\u003c\/h3\u003e\u003cp\u003eApplicable to brake pads only. WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67757527990450,"sku":"140-17149-DR","price":2811.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-17149-DR_kit-xl.jpg?v=1792450415","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-17149-dr","provider":"PMB Performance","version":"1.0","type":"link"}