{"product_id":"wilwood-140-16163-dr","title":"Wilwood Red Dynapro-LP Rear Disc and Electric Parking Brake Package, Chevy 12-Bolt Axles with C-Clips, Drilled Rotors, 2.75-Inch Offset","description":"\u003cp\u003eRed low-profile service calipers and matching red EPB units are supplied with drilled 11-inch iron rotors in this rear kit. The mounting plates are intended for the Chevy 12-bolt C-clip interface at 2.75 inches of axle offset. Bill Wood founded Wilwood Engineering in 1977. Based in Camarillo, California, the company designs and manufactures disc brake systems for motorsport, street-performance and specialized use. Calipers, brake rotors, master cylinders, valves, fittings and brake lines are among its components; their selection depends on the needs of the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number — 140-16163-DR; supplied as one rear axle brake kit.\u003c\/li\u003e\n\u003cli\u003eRotor material and surface — Iron; vented; SRP Drilled \u0026amp; Slotted; surface finish Black Electro Coat.\u003c\/li\u003e\n\u003cli\u003eRear axle interface — 12 Bolt housing flange; 2.75 in; 69.85 mm axle offset. Measure the installed assembly.\u003c\/li\u003e\n\u003cli\u003eSupplied service pads — BP-10 compound; verify suitability for the intended operating conditions.\u003c\/li\u003e\n\u003cli\u003eMechanical contents — Separate wheel hubs are not included; mounting hardware supplied; spindles not included.\u003c\/li\u003e\n\u003cli\u003eCataloged rotor\/hat mounting-hole pattern — 5 x 4.5 in; 5 x 114.3 mm; 5 x 4.75 in; 5 x 120.65 mm; 5 x 5 in; 5 x 127 mm bolt circle; cataloged stud-hole clearances 0.52 in; 13.21 mm. The existing hub or axle flange determines the vehicle wheel pattern and stud specification. These rotor\/hat drillings do not convert that pattern.\u003c\/li\u003e\n\u003cli\u003eParking-brake package — Two separate electric parking calipers, control unit, switch with pigtail and universal wiring harness included; vehicle electrical connections require installation.\u003c\/li\u003e\n\u003cli\u003eRotor dimensions — 11.00 in; 279.4 mm outside diameter; 0.81 in; 20.57 mm thick.\u003c\/li\u003e\n\u003cli\u003eHydraulic installation — Hydraulic lines and fittings are separate and must be selected for the vehicle; master cylinder not included; brake booster not included.\u003c\/li\u003e\n\u003cli\u003eMinimum nominal wheel diameter — 14 in; 355.6 mm; full spoke\/barrel clearance must be checked using the installation drawing.\u003c\/li\u003e\n\u003cli\u003eHydraulic service calipers — Forged Dynapro Low Profile; 4 pistons per caliper; Forged Aluminium body; lug mounting; Stainless pistons.\u003c\/li\u003e\n\u003cli\u003eCaliper finish and port — Red Powder Coat; hydraulic inlet 1\/8-27 NPT.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the actual rear axle to the 12 Bolt diagram and 2.75-inch offset before disassembly. Verify the bearing arrangement, axle register and wheel-bolt pattern independently, including any changes made during a previous axle conversion. Use the full 14-inch minimum wheel envelope for both caliper positions. Confirm C-clip axle retention and end play; a C-clip eliminator or different housing flange requires its own fit assessment.\u003c\/p\u003e\u003cp\u003eVehicle fitment in the table below remains conditional on axle identity. Measure the housing flange, bearing\/retention arrangement, register and offset rather than relying on vehicle year. For Chevelle, 442, Beaumont, Camaro and Apollo vehicles, establish rear-axle fit independently of the front spindle configuration. Confirm the housing flange, axle retention and offset on the installed rear assembly.\u003c\/p\u003e\u003cp\u003eThe EPB is a parking-hold system, not an emergency stopping brake. It includes a separate left\/right motor-driven caliper pair, control unit, switch with pigtail and universal wiring harness. Vehicle power, ground, ignition\/accessory connections and protected cable routing must be installed to DS1353; it is not a plug-in factory-harness replacement.\u003c\/p\u003e\u003cp\u003ePMB Performance has more than 20 years of parts experience and can help assess the documented brake configuration. Provide the vehicle details together with clear mounting-area photographs and measurements.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1400.pdf\"\u003eInstallation instructions\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/Axle-Offset-Worksheet-Wilwood.pdf\"\u003eTechnical bulletin\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1353.pdf\"\u003eEPB mounting and wiring instructions\u003c\/a\u003e before selecting hardware or checking wheel clearance.\u003c\/p\u003e\u003ch3\u003eManufacturer Warning\u003c\/h3\u003e\u003cp\u003eApplicable to brake pads only. WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.\u003c\/p\u003e\u003cdiv class=\"fitment-table-wrap\" style=\"overflow-x:auto\"\u003e\u003ctable class=\"specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eModel option\u003c\/th\u003e\n\u003cth\u003eFront brakes\u003c\/th\u003e\n\u003cth\u003eRear brakes\u003c\/th\u003e\n\u003cth\u003eKit application\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1968\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Hub Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1969\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Pin Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003e442\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Hub Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1969\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eBeaumont\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Hub Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1969\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eBeaumont\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Pin Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967-1969\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Hub Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967-1969\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Pin Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1970\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003e442\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Pin Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1973-1974\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eApollo\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Hub Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1973-1974\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eApollo\u003c\/td\u003e\n\u003ctd\u003ew\/ Ridetech Pin Spindle\u003c\/td\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3, 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67757385416882,"sku":"140-16163-DR","price":2404.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-16163-DR_kit-xl.jpg?v=1792447281","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-16163-dr","provider":"PMB Performance","version":"1.0","type":"link"}