{"product_id":"wilwood-140-16156-r","title":"Wilwood Rear GT Brakes with Red Superlite Service and EPB Calipers, 14-Inch Two-Piece Rotors, Small Ford 2.66-Inch Offset","description":"\u003cp\u003eThis GT-slotted rear conversion uses red Superlite hydraulic calipers, aluminum rotor hats and separate electric parking calipers. The 14-inch ring diameter sets the wheel-envelope requirement, while the 2.66-inch Small Ford axle offset determines alignment. Camarillo, California is home to Wilwood Engineering, the company Bill Wood founded in 1977. Wilwood designs and manufactures disc braking systems and components for street-performance, motorsport and specialized applications. Its calipers, brake rotors, master cylinders, valves, fittings and brake lines are selected to work within the complete installation.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number\u003c\/strong\u003e: 140-16156-R; supplied as one rear axle brake kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCataloged rotor\/hat mounting-hole pattern\u003c\/strong\u003e: 5 x 4.5 in; 5 x 114.3 mm; 5 x 4.75 in; 5 x 120.65 mm; 5 x 5 in; 5 x 127 mm bolt circle; cataloged stud-hole clearances 0.520 in; 13.21 mm. The existing hub or axle flange determines the vehicle wheel pattern and stud specification. These rotor\/hat drillings do not convert that pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum nominal wheel diameter\u003c\/strong\u003e: 18 in; 457.2 mm; full spoke\/barrel clearance must be checked using the installation drawing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic installation\u003c\/strong\u003e: Hydraulic lines and fittings are separate and must be selected for the vehicle; master cylinder not included; brake booster not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied service pads\u003c\/strong\u003e: BP-10 compound; verify suitability for the intended operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor material and surface\u003c\/strong\u003e: Spec-37 Iron; vented; GT Slotted; surface finish Black Electro Coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking-brake package\u003c\/strong\u003e: Two separate electric parking calipers, control unit, switch with pigtail and universal wiring harness included; vehicle electrical connections require installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical contents\u003c\/strong\u003e: Separate wheel hubs are not included; mounting hardware supplied; spindles not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic service calipers\u003c\/strong\u003e: Forged Narrow Superlite 4R; 4 pistons per caliper; Forged Aluminium body; radial mounting; Stainless pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting hats\u003c\/strong\u003e: Aluminum; Black E-Coat; hat offset 2.035 inches. This is a hat dimension, not the axle offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper finish and port\u003c\/strong\u003e: Red Powder Coat; hydraulic inlet 1\/8-27 NPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear axle interface\u003c\/strong\u003e: Small Ford housing flange; 2.66 in; 67.56 mm axle offset. Measure the installed assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor dimensions\u003c\/strong\u003e: 14.00 in; 355.6 mm outside diameter; 1.10 in; 27.94 mm thick.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eThis kit is selected for Small Ford geometry at 2.66 inches of axle offset. Wheel-stud pattern and register dimensions must match the supplied rotors or hats, and the parking motors and harness connectors need clearance throughout suspension travel. Compare the intended 18-inch or larger wheel with the installation drawing.\u003c\/p\u003e\u003cp\u003eReview the fitment table below after identifying the rear axle. Confirm housing-flange dimensions, retention hardware, offset, register and wheel pattern against the kit drawing. For a 1990 Lincoln Town Car, identify the actual axle and confirm the specified interface; do not select this conversion from model and year alone.\u003c\/p\u003e\u003cp\u003eParking actuation is electric through a supplied controller, switch with pigtail, universal harness and two motor-driven calipers. The installer must provide suitable vehicle power\/ground and ignition\/accessory connections and check lead routing to DS1353. These additional calipers are for parking hold, not an emergency stop function.\u003c\/p\u003e\u003cp\u003eBefore selecting the conversion, PMB Performance can review the listed requirements with you. We have over 20 years of parts experience; include axle measurements and any wheel, hub or suspension changes.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1417.pdf\"\u003eInstallation instructions\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/Axle-Offset-Worksheet-Wilwood.pdf\"\u003eTechnical bulletin\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1353.pdf\"\u003eEPB mounting and wiring instructions\u003c\/a\u003e before selecting hardware or checking wheel clearance.\u003c\/p\u003e\u003ch3\u003eManufacturer Warning\u003c\/h3\u003e\u003cp\u003eApplicable to brake pads only. WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.\u003c\/p\u003e\u003cdiv class=\"fitment-table-wrap\" style=\"overflow-x:auto\"\u003e\u003ctable class=\"specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eModel option\u003c\/th\u003e\n\u003cth\u003eFront brakes\u003c\/th\u003e\n\u003cth\u003eRear brakes\u003c\/th\u003e\n\u003cth\u003eKit application\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1990\u003c\/td\u003e\n\u003ctd\u003eLincoln\u003c\/td\u003e\n\u003ctd\u003eTown Car\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eDisc\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67757385187506,"sku":"140-16156-R","price":3725.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-16156-R_kit-xl.jpg?v=1792447277","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-16156-r","provider":"PMB Performance","version":"1.0","type":"link"}