{"product_id":"wilwood-140-16143-d","title":"Wilwood Drilled Rear Superlite Brake Kit with Black EPB Calipers for Big Ford 2.36-Inch Axles, 12.88-Inch Two-Piece Rotors","description":"\u003cp\u003eDrilled-and-slotted Spec-37 rings, aluminum hats and black Superlite calipers form the service-brake assembly in this rear package. The independent EPB units share those rotors and require motor and harness clearance around the axle. From its Camarillo, California base, Wilwood Engineering designs and manufactures disc brake systems and components. Bill Wood founded the company in 1977. Its calipers, brake rotors, master cylinders, valves, fittings and brake lines serve motorsport, street-performance and specialized applications, with individual parts matched to the complete braking arrangement.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 140-16143-D; supplied as one rear axle brake kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum nominal wheel diameter:\u003c\/strong\u003e 17 in; 431.8 mm; full spoke\/barrel clearance must be checked using the installation drawing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCataloged rotor\/hat mounting-hole pattern:\u003c\/strong\u003e 5 x 4.5 in; 5 x 114.3 mm; 5 x 4.75 in; 5 x 120.65 mm; 5 x 5 in; 5 x 127 mm bolt circle; cataloged stud-hole clearances 0.520 in; 13.21 mm. The existing hub or axle flange determines the vehicle wheel pattern and stud specification. These rotor\/hat drillings do not convert that pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper finish and port:\u003c\/strong\u003e Black Powder Coat; hydraulic inlet 1\/8-27 NPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical contents:\u003c\/strong\u003e Separate wheel hubs are not included; mounting hardware supplied; spindles not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear axle interface:\u003c\/strong\u003e Big Ford housing flange; 2.36 in; 59.94 mm axle offset. Measure the installed assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking-brake package:\u003c\/strong\u003e Two separate electric parking calipers, control unit, switch with pigtail and universal wiring harness included; vehicle electrical connections require installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting hats:\u003c\/strong\u003e Aluminum; Black E-Coat; hat offset 1.625 inches. This is a hat dimension, not the axle offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic service calipers:\u003c\/strong\u003e Forged Narrow Superlite 4R; 4 pistons per caliper; Forged Aluminium body; radial mounting; Stainless pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor material and surface:\u003c\/strong\u003e Spec-37 Iron; vented; SRP Drilled \u0026amp; Slotted; surface finish Black Electro Coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor dimensions:\u003c\/strong\u003e 12.88 in; 327.15 mm outside diameter; 1.10 in; 27.94 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied service pads:\u003c\/strong\u003e BP-10 compound; verify suitability for the intended operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic installation:\u003c\/strong\u003e Hydraulic lines and fittings are separate and must be selected for the vehicle; master cylinder not included; brake booster not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eInstallation requires the Big Ford housing flange and a measured 2.36-inch axle offset. Compare the housing bolt pattern, bearing\/axle retention, wheel pattern and center registration with the kit drawing, then check both service-caliper and EPB-motor clearance. Nominal 17-inch wheel diameter is only the starting point.\u003c\/p\u003e\u003cp\u003eReview the fitment table below after identifying the rear axle. Confirm housing-flange dimensions, retention hardware, offset, register and wheel pattern against the kit drawing. For a 1990 Lincoln Town Car, identify the actual axle and confirm the specified interface; do not select this conversion from model and year alone.\u003c\/p\u003e\u003cp\u003eParking actuation is electric through a supplied controller, switch with pigtail, universal harness and two motor-driven calipers. The installer must provide suitable vehicle power\/ground and ignition\/accessory connections and check lead routing to DS1353. These additional calipers are for parking hold, not an emergency stop function.\u003c\/p\u003e\u003cp\u003eContact PMB Performance if the installed hardware differs from the documented arrangement. More than 20 years of parts experience informs our fitment review; photographs and measured dimensions are particularly useful.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1412.pdf\"\u003eInstallation instructions\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/Axle-Offset-Worksheet-Wilwood.pdf\"\u003eTechnical bulletin\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1353.pdf\"\u003eEPB mounting and wiring instructions\u003c\/a\u003e before selecting hardware or checking wheel clearance.\u003c\/p\u003e\u003ch3\u003eManufacturer Warning\u003c\/h3\u003e\u003cp\u003eApplicable to brake pads only. WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.\u003c\/p\u003e\u003cdiv class=\"fitment-table-wrap\" style=\"overflow-x:auto\"\u003e\u003ctable class=\"specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eModel option\u003c\/th\u003e\n\u003cth\u003eFront brakes\u003c\/th\u003e\n\u003cth\u003eRear brakes\u003c\/th\u003e\n\u003cth\u003eKit application\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1990\u003c\/td\u003e\n\u003ctd\u003eLincoln\u003c\/td\u003e\n\u003ctd\u003eTown Car\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eDisc\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67757382893746,"sku":"140-16143-D","price":3530.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-16143-D_kit-xl.jpg?v=1792447238","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-16143-d","provider":"PMB Performance","version":"1.0","type":"link"}