{"product_id":"wilwood-140-16142-r","title":"Wilwood Rear Dynalite Plain-Rotor Kit with Red Calipers and EPB Controls, Big Ford Axle Housing, 2.36-Inch Offset","description":"\u003cp\u003eThis plain-rotor rear conversion uses red four-piston Dynalite service calipers and dedicated electric parking calipers. The rotor location is fixed by the Big Ford housing flange and 2.36-inch axle offset, so those dimensions must be measured on the installed axle. Wilwood Engineering has its base in Camarillo, California and was founded by Bill Wood in 1977. The company’s work covers disc brake systems and components for specialized vehicles, street-performance applications and motorsport. Calipers, brake rotors, master cylinders, valves, fittings and brake lines must be chosen with the rest of the braking system in mind.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number\u003c\/strong\u003e: 140-16142-R; supplied as one rear axle brake kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper finish and port\u003c\/strong\u003e: Red Powder Coat; hydraulic inlet 1\/8-27 NPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCataloged rotor\/hat mounting-hole pattern\u003c\/strong\u003e: 5 x 4.5 in; 5 x 114.3 mm; 5 x 4.75 in; 5 x 120.65 mm; 5 x 5 in; 5 x 127 mm bolt circle; cataloged stud-hole clearances 0.52 in; 13.21 mm. The existing hub or axle flange determines the vehicle wheel pattern and stud specification. These rotor\/hat drillings do not convert that pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor dimensions\u003c\/strong\u003e: 12.19 in; 309.63 mm outside diameter; 0.81 in; 20.57 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical contents\u003c\/strong\u003e: Separate wheel hubs are not included; mounting hardware supplied; spindles not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum nominal wheel diameter\u003c\/strong\u003e: 15 in; 381 mm; full spoke\/barrel clearance must be checked using the installation drawing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor material and surface\u003c\/strong\u003e: Iron; vented; Plain Face; surface finish Plain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic service calipers\u003c\/strong\u003e: Forged Dynalite Internal; 4 pistons per caliper; Forged Aluminium body; lug mounting; Stainless pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied service pads\u003c\/strong\u003e: BP-10 compound; verify suitability for the intended operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear axle interface\u003c\/strong\u003e: Big Ford housing flange; 2.36 in; 59.94 mm axle offset. Measure the installed assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking-brake package\u003c\/strong\u003e: Two separate electric parking calipers, control unit, switch with pigtail and universal wiring harness included; vehicle electrical connections require installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic installation\u003c\/strong\u003e: Hydraulic lines and fittings are separate and must be selected for the vehicle; master cylinder not included; brake booster not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eThis kit is selected for Big Ford geometry at 2.36 inches of axle offset. Wheel-stud pattern and register dimensions must match the supplied rotors or hats, and the parking motors and harness connectors need clearance throughout suspension travel. Compare the intended 15-inch or larger wheel with the installation drawing.\u003c\/p\u003e\u003cp\u003eUse the fitment table below together with a measured axle check. A model name alone does not establish conversion compatibility; compare the flange, axle offset, register and chosen wheel pattern. For a 1990 Lincoln Town Car, identify the actual axle and confirm the specified interface; do not select this conversion from model and year alone.\u003c\/p\u003e\u003cp\u003eThe supplied EPB switch and pigtail connect through a universal harness to the controller and separate parking-caliper motors. Vehicle-specific power, ground and ignition\/accessory wiring still requires installation under DS1353. This static-hold system is independent of the service brakes and is not intended for emergency stopping.\u003c\/p\u003e\u003cp\u003eOur team at PMB Performance can help compare the existing brakes with this kit’s requirements. Drawing on over 20 years of parts experience, we ask for the vehicle year, axle identification and wheel-clearance details.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1439.pdf\"\u003eInstallation instructions\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/Axle-Offset-Worksheet-Wilwood.pdf\"\u003eTechnical bulletin\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1353.pdf\"\u003eEPB mounting and wiring instructions\u003c\/a\u003e before selecting hardware or checking wheel clearance.\u003c\/p\u003e\u003ch3\u003eManufacturer Warning\u003c\/h3\u003e\u003cp\u003eApplicable to brake pads only. WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.\u003c\/p\u003e\u003cdiv class=\"fitment-table-wrap\" style=\"overflow-x:auto\"\u003e\u003ctable class=\"specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eModel option\u003c\/th\u003e\n\u003cth\u003eFront brakes\u003c\/th\u003e\n\u003cth\u003eRear brakes\u003c\/th\u003e\n\u003cth\u003eKit application\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1990\u003c\/td\u003e\n\u003ctd\u003eLincoln\u003c\/td\u003e\n\u003ctd\u003eTown Car\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eDisc\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67757382795442,"sku":"140-16142-R","price":2262.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-16142-R_kit-xl.jpg?v=1792447237","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-16142-r","provider":"PMB Performance","version":"1.0","type":"link"}