{"product_id":"wilwood-140-16134-d","title":"Wilwood Black Drilled Rear Brake and Electric Parking Kit, Big Ford Bronco 2.00-Inch Axle Offset, Dynalite 12.19-Inch Conversion","description":"\u003cp\u003eThe drilled-and-slotted rear rotors in this black Dynalite package match the 2.00-inch-offset Big Ford Bronco axle arrangement. The kit is a complete service-brake and electric parking conversion, requiring separate hydraulic lines to finish the installation. From its Camarillo, California base, Wilwood Engineering designs and manufactures disc brake systems and components. Bill Wood founded the company in 1977. Its calipers, brake rotors, master cylinders, valves, fittings and brake lines serve motorsport, street-performance and specialized applications, with individual parts matched to the complete braking arrangement.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 140-16134-D; supplied as one rear axle brake kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor dimensions:\u003c\/strong\u003e 12.19 in; 309.63 mm outside diameter; 0.81 in; 20.57 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied service pads:\u003c\/strong\u003e BP-10 compound; verify suitability for the intended operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper finish and port:\u003c\/strong\u003e Black Powder Coat; hydraulic inlet 1\/8-27 NPT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic installation:\u003c\/strong\u003e Hydraulic lines and fittings are separate and must be selected for the vehicle; master cylinder not included; brake booster not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCataloged rotor\/hat mounting-hole pattern:\u003c\/strong\u003e 5 x 4.5 in; 5 x 114.3 mm; 5 x 5.5 in; 5 x 139.7 mm bolt circle; cataloged stud-hole clearances 0.56 in; 14.22 mm; 0.64 in; 16.26 mm. The existing hub or axle flange determines the vehicle wheel pattern and stud specification. These rotor\/hat drillings do not convert that pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum nominal wheel diameter:\u003c\/strong\u003e 15 in; 381 mm; full spoke\/barrel clearance must be checked using the installation drawing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor material and surface:\u003c\/strong\u003e Iron; vented; SRP Drilled \u0026amp; Slotted; surface finish Black Electro Coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic service calipers:\u003c\/strong\u003e Forged Dynalite Internal; 4 pistons per caliper; Forged Aluminium body; lug mounting; Stainless pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear axle interface:\u003c\/strong\u003e Big Ford Bronco housing flange; 2.00 in; 50.8 mm axle offset. Measure the installed assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking-brake package:\u003c\/strong\u003e Two separate electric parking calipers, control unit, switch with pigtail and universal wiring harness included; vehicle electrical connections require installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical contents:\u003c\/strong\u003e Separate wheel hubs are not included; mounting hardware supplied; spindles not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eInstallation requires the Big Ford Bronco housing flange and a measured 2.00-inch axle offset. Compare the housing bolt pattern, bearing\/axle retention, wheel pattern and center registration with the kit drawing, then check both service-caliper and EPB-motor clearance. Nominal 15-inch wheel diameter is only the starting point. DS1411 identifies the 1966–1977 Ford Bronco 11 x 1.75-inch drum axle; choose this kit’s specific offset, not the alternative shown in the same manual.\u003c\/p\u003e\u003cp\u003eAny vehicle application in the fitment table below depends on the installed axle interface. Compare flange and bearing geometry, axle offset, center register and wheel hardware with the specified assembly. For a 1990 Lincoln Town Car, identify the actual axle and confirm the specified interface; do not select this conversion from model and year alone.\u003c\/p\u003e\u003cp\u003eTwo dedicated motorized calipers provide parking hold separately from the hydraulic service calipers. The kit supplies their switch with pigtail, control unit and universal wiring harness. DS1353 covers the required 12V vehicle connections and component placement. The EPB is not an emergency stopping brake.\u003c\/p\u003e\u003cp\u003eWith more than 20 years in parts, PMB Performance can help review the compatibility checks for this conversion. Include information about the axle, retained hubs and any changes from the original suspension.\u003c\/p\u003e\u003cp\u003eReview the \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1411.pdf\"\u003eInstallation instructions\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/Axle-Offset-Worksheet-Wilwood.pdf\"\u003eTechnical bulletin\u003c\/a\u003e, \u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1353.pdf\"\u003eEPB mounting and wiring instructions\u003c\/a\u003e before selecting hardware or checking wheel clearance.\u003c\/p\u003e\u003ch3\u003eManufacturer Warning\u003c\/h3\u003e\u003cp\u003eApplicable to brake pads only. WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.\u003c\/p\u003e\u003cdiv class=\"fitment-table-wrap\" style=\"overflow-x:auto\"\u003e\u003ctable class=\"specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eModel option\u003c\/th\u003e\n\u003cth\u003eFront brakes\u003c\/th\u003e\n\u003cth\u003eRear brakes\u003c\/th\u003e\n\u003cth\u003eKit application\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1990\u003c\/td\u003e\n\u003ctd\u003eLincoln\u003c\/td\u003e\n\u003ctd\u003eTown Car\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eDisc\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eRear Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67757381714098,"sku":"140-16134-D","price":2518.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-16134-D_kit-xl.jpg?v=1792447222","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-16134-d","provider":"PMB Performance","version":"1.0","type":"link"}