{"product_id":"wilwood-140-13305-d","title":"Wilwood Front 12.88-Inch SRP Brake Conversion with Black Superlite Calipers, Bronco Dana 44 Disc Spindles (1976–1977)","description":"\u003cp\u003eDrilled-and-slotted 12.88-inch rotors accompany black six-piston calipers in this later early-Bronco front package. It is built around the factory disc spindle and existing compatible hub, with hoses included. The manufacturer, Wilwood Engineering, was established by Bill Wood in 1977 and is based in Camarillo, California. It designs and builds disc brake systems with a range covering calipers, brake rotors, master cylinders, valves, fittings and brake lines. Motorsport, street-performance and specialized applications require components selected for the complete braking system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 140-13305-D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication and package:\u003c\/strong\u003e Front Brake Kits - Street Performance; Front Kits; Disc; Sold as a kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor dimensions:\u003c\/strong\u003e 12.88 in; 327.15 mm outside diameter; 1.25 in; 31.75 mm thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor construction:\u003c\/strong\u003e Spec-37 Iron; Vented; SRP Drilled \u0026amp; Slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaliper assembly:\u003c\/strong\u003e Forged Narrow Superlite 6R; 6 pistons per caliper; Forged Aluminium body; Radial mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston and finish specification:\u003c\/strong\u003e Stainless pistons; Black calipers; Black Powder Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic inlet:\u003c\/strong\u003e 1\/8-27 NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern(s):\u003c\/strong\u003e 5 x 5.5 in; 5 x 139.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud-hole \/ clearance provision:\u003c\/strong\u003e 0.640 in; 16.26 mm; diameter provision, not a thread designation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel diameter starting requirement:\u003c\/strong\u003e 17 in; 431.8 mm; verify the individual wheel against the installation drawing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded mechanical components:\u003c\/strong\u003e Mounting hardware: Yes; hub(s): No; spindle(s): No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic components supplied:\u003c\/strong\u003e Master cylinder: No; brake booster: No; brake lines: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified pad compound:\u003c\/strong\u003e BP-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate rotor-hat specification:\u003c\/strong\u003e Aluminum; Black E-Coat; offset current exact kit and hat pages list 1.000 inch, while the linked installation parts list labels 1.300 inches; manufacturer confirmation required before relying on this dimension; part 170-13314\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished wheel-position \/ hub offset:\u003c\/strong\u003e +.00 inch per side; verify against the documented spindle assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm the original Dana 44 disc components rather than a GM conversion. Inspect the required shield modification and spoke clearance using DS1010 before fitting the hat and rotor.\u003c\/p\u003e\u003cp\u003eDocumented model groups, subject to each year, submodel and spindle\/axle qualification: Ford Bronco.\u003c\/p\u003e\u003cp\u003eFor 1976–1977 Bronco Dana 44 factory-disc spindles only. GM disc-brake\/spindle conversion components are excluded.\u003c\/p\u003e\u003cp\u003eThe included stainless steel braided hydraulic hose kit is 220-13319, listed as 14.00 inches. Route it with adequate steering and suspension clearance.\u003c\/p\u003e\u003cp\u003eKit will not work with GM Disc Brake \/ Spindle components.\u003c\/p\u003e\u003ch3\u003eManufacturer References\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/BrakeKits\/BrakeKitsProdFront?itemno=140-13305-D\"\u003eWilwood exact kit specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1010.pdf\"\u003eWilwood installation instructions DS1010\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePMB Performance can help identify the required brake component with over 20 years of parts experience. Send the kit details and original-part measurements.\u003c\/p\u003e\u003cp\u003eReview the complete application table below with the year, submodel and installation qualifications above.\u003c\/p\u003e\u003cdiv class=\"fitment-table-wrap\" style=\"overflow-x:auto\"\u003e\u003ctable class=\"specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eModel option\u003c\/th\u003e\n\u003cth\u003eFront brakes\u003c\/th\u003e\n\u003cth\u003eRear brakes\u003c\/th\u003e\n\u003cth\u003eKit application\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1976-1977\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eDisc\u003c\/td\u003e\n\u003ctd\u003eDrum\u003c\/td\u003e\n\u003ctd\u003eFront Kit\u003c\/td\u003e\n\u003ctd\u003e1, 2, 3\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67755881267378,"sku":"140-13305-D","price":2308.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-13305-D_kit-xl.jpg?v=1792431374","url":"https:\/\/pmbperformance.com\/products\/wilwood-140-13305-d","provider":"PMB Performance","version":"1.0","type":"link"}