{"product_id":"2005-2010-jeep-grand-cherokee-carbon-fiber-fan-shroud","title":"2005-2010 Jeep Grand Cherokee Carbon Fiber Fan Shroud","description":"\u003ch4\u003eTurn your Grand Cherokee's engine bay into a showpiece with a genuine carbon fiber overlay built to outlast the competition.\u003c\/h4\u003e\n\u003cp\u003eThis fan shroud overlay is handcrafted in the USA from premium carbon fiber and finished with a high gloss UV resistant gel coat that resists yellowing, fading, and cracking far longer than the automotive clear coats most competitors use. It drops directly over your existing factory fan shroud, so there is no cutting, trimming, or fabrication involved, just a clean surface and a strong adhesive bond.\u003c\/p\u003e\n\u003cp\u003eThe gel coat finish is exceptionally hard and holds a mirror like shine that actually improves with regular polishing. If it ever picks up a scratch or a gouge from road debris, it can be wet sanded, re buffed, or filled with clear gel coat to look like new again, something fiberglass and lower grade carbon fiber pieces simply cannot do.\u003c\/p\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eFits 2005 to 2010 Jeep Grand Cherokee WK generation models, including Laredo, Limited, Overland, SRT8, and Special Edition trims. Confirm your factory fan shroud shape matches before ordering.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBOAW-FS05JPGC-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGenuine carbon fiber with UV resistant high gloss gel coat finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2005 to 2010 Jeep Grand Cherokee WK, Laredo, Limited, Overland, SRT8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverlay with included high strength 3M adhesive tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaintenance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWax monthly with pure carnauba wax, compatible with ceramic coatings and PPF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Carbon Fiber Fan Shroud Overlay (BOAW-FS05JPGC-C)\u003c\/li\u003e\n\u003cli\u003eHigh strength 3M adhesive tape, pre applied for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this replace my factory fan shroud or go over it?\u003c\/strong\u003e\u003cbr\u003e\nThis is an overlay piece, it adheres directly to your existing factory fan shroud rather than replacing it, so the stock part stays in place underneath.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the part number for this fan shroud overlay?\u003c\/strong\u003e\u003cbr\u003e\nThe part number is BOAW-FS05JPGC-C, and it is molded to match the WK generation Grand Cherokee shroud shape used from 2005 to 2010.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I keep the gel coat finish looking new?\u003c\/strong\u003e\u003cbr\u003e\nA monthly wax with pure carnauba wax keeps the gel coat from drying out, and it is safe to run ceramic coatings or PPF over it for extra long term protection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRemove the factory fan shroud from the vehicle, or access it in place if removal is not required.\u003c\/li\u003e\n\u003cli\u003eThoroughly clean the mounting surface with isopropyl alcohol or a wax and grease remover to eliminate all wax, oil, and residue.\u003c\/li\u003e\n\u003cli\u003eDry fit the overlay onto the factory shroud to confirm alignment before exposing the adhesive.\u003c\/li\u003e\n\u003cli\u003ePeel back a small section of the 3M adhesive backing and set one edge of the overlay in place.\u003c\/li\u003e\n\u003cli\u003eGradually remove the remaining backing while pressing the overlay down, working outward to prevent air pockets.\u003c\/li\u003e\n\u003cli\u003eApply firm, even pressure across the entire surface, using a plastic squeegee if available, to lock in a secure bond.\u003c\/li\u003e\n\u003cli\u003eLet the adhesive cure for 24 hours before washing the vehicle, then reinstall the shroud assembly if it was removed.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Default Title","offer_id":47772189819058,"sku":"BOAW-FS05JPGC-C","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/black-ops-boaw-fs05jpgc-c-jeep-grand-cherokee-carbon-fiber-fan-shroud.png?v=1785349598","url":"https:\/\/pmbperformance.com\/products\/2005-2010-jeep-grand-cherokee-carbon-fiber-fan-shroud","provider":"PMB Performance","version":"1.0","type":"link"}