{"title":"Wilwood","description":null,"products":[{"product_id":"wilwood-powerlite-mc4-rear-brake-w-handbrake-kit-for-porsche-914-1970-76","title":"Wilwood Rear Brake Kit for Porsche 914 (1970–1976) – Powerlite with Parking Brake","description":"\u003cp\u003eUpgrade both rear brakes of your four-cylinder Porsche 914 with Powerlite four-piston service calipers and separate MC4 mechanical parking-brake calipers. The kit includes vented rotors, flexlines and replacement parking-brake cables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePhoto note: \u003c\/strong\u003eSome photographs show earlier plain-face rotors. Current supplied-to-order kits follow the rotor specification in the selected product option.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-4\u003c\/td\u003e\n\u003ctd\u003e1970–1971\u003c\/td\u003e\n\u003ctd\u003eFour-cylinder\u003c\/td\u003e\n\u003ctd\u003eFactory rear uprights and hubs; 19 mm master cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-4\u003c\/td\u003e\n\u003ctd\u003e1972\u003c\/td\u003e\n\u003ctd\u003eBase, four-cylinder\u003c\/td\u003e\n\u003ctd\u003eFactory rear uprights and hubs; 19 mm master cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-4\u003c\/td\u003e\n\u003ctd\u003e1973–1976\u003c\/td\u003e\n\u003ctd\u003eBase, four-cylinder\u003c\/td\u003e\n\u003ctd\u003eFactory rear uprights and hubs; 19 mm master cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eA 19 mm master cylinder is required and is not included. Have the front and rear brake combination checked together before installation.\u003c\/p\u003e\u003cp\u003eFor a factory 914-6, a five-lug conversion or changed rear hubs\/uprights, contact PMB before ordering.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat is included for both rear sides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Powerlite four-piston service-brake calipers in the selected Black or Red finish.\u003c\/li\u003e\n\u003cli\u003eTwo 11.38 × 0.81-inch vented rotors with the rotor adapters\/hats for this application.\u003c\/li\u003e\n\u003cli\u003eBP-10 service-brake pads for both sides of the axle.\u003c\/li\u003e\n\u003cli\u003eCaliper brackets, installation hardware and braided stainless steel flexlines.\u003c\/li\u003e\n\u003cli\u003eLeft- and right-hand MC4 mechanical parking-brake calipers.\u003c\/li\u003e\n\u003cli\u003eParking-brake cable kit for connection to the existing handbrake mechanism.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService caliper\u003c\/th\u003e\n\u003ctd\u003ePowerlite; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor diameter × thickness\u003c\/th\u003e\n\u003ctd\u003e11.38 × 0.81 inches (approximately 289 × 20.6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParking brake\u003c\/th\u003e\n\u003ctd\u003eSeparate MC4 mechanical calipers and cables included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts retained and parking-brake setup\u003c\/h2\u003e\u003cp\u003eThe original compatible rear hubs and handbrake lever are retained; new rear hubs are not included. The hydraulic Powerlite calipers handle normal braking, while the MC4 calipers provide the mechanical parking brake. Correct cable routing, initial adjustment and future wear adjustment are required. Brake fluid and a 19 mm master cylinder are separate.\u003c\/p\u003e\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\u003ch3\u003eDoes the handbrake still work?\u003c\/h3\u003e\u003cp\u003eThe kit provides separate MC4 mechanical parking-brake calipers and the cable kit to connect to the original handbrake mechanism. They must be installed, adjusted and tested according to DS1568.\u003c\/p\u003e\u003ch3\u003eAre the front brakes included?\u003c\/h3\u003e\u003cp\u003eNo. This is the rear axle kit. The 914 front kits are 140-17473 for 1970–1972 and 140-17474 for 1973–1976; confirm compatibility with your actual car and the complete brake system.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1568.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1568 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1568_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. Include photos of the installed front spindles or rear uprights, your wheel details and any known hub or brake conversion. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red \/ GT Slotted","offer_id":43839110774962,"sku":"140-17475-R","price":2137.08,"currency_code":"USD","in_stock":true},{"title":"Red \/ Drilled\/Slotted","offer_id":43839110807730,"sku":"140-17475-DR","price":2279.94,"currency_code":"USD","in_stock":true},{"title":"Black \/ GT Slotted","offer_id":43839110840498,"sku":"140-17475","price":2137.08,"currency_code":"USD","in_stock":true},{"title":"Black \/ Drilled\/Slotted","offer_id":43839110873266,"sku":"140-17475-D","price":2279.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/brake_kit_140-17475-R-xl.jpg?v=1711063249"},{"product_id":"wilwood-front-brake-kit-for-porsche-914-4-1970-72","title":"Wilwood Front Brake Kit for Porsche 914 (1970–1972) – Powerlite","description":"\u003cp\u003eUpgrade your four-cylinder Porsche 914 with Powerlite four-piston front calipers and 11.38-inch vented rotors. The kit includes new hubs and uses compatible factory front spindles, so a 911 strut conversion is not required.\u003c\/p\u003e\u003cp\u003eThis kit is for the early 914-4, model years 1970 through 1972. Its caliper brackets are made for those cars and are a different part from the brackets in the 1973 through 1976 kit, so order by your car's model year. If the front struts may have come from another car, or you don't know the car's history, send us photos of the strut and caliper mounting and we'll confirm which bracket set fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePhoto note: \u003c\/strong\u003eSome photographs show earlier plain-face rotors. Current supplied-to-order kits follow the rotor specification in the selected product option.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-4\u003c\/td\u003e\n\u003ctd\u003e1970–1971\u003c\/td\u003e\n\u003ctd\u003eFour-cylinder\u003c\/td\u003e\n\u003ctd\u003eFactory four-cylinder front spindles; 19 mm master cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-4\u003c\/td\u003e\n\u003ctd\u003e1972\u003c\/td\u003e\n\u003ctd\u003eBase, four-cylinder\u003c\/td\u003e\n\u003ctd\u003eFactory four-cylinder front spindles; 19 mm master cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eA 19 mm master cylinder is required and is not included. Have the front and rear brake combination checked together before installation.\u003c\/p\u003e\u003cp\u003eFor a factory 914-6, a five-lug conversion or changed struts\/hubs, contact PMB before ordering. The early and late front kits use different mounting brackets.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat is included for both front sides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Powerlite four-piston service-brake calipers in the selected Black or Red finish.\u003c\/li\u003e\n\u003cli\u003eTwo 11.38 × 0.81-inch vented rotors with the rotor adapters\/hats for this application.\u003c\/li\u003e\n\u003cli\u003eBP-10 service-brake pads for both sides of the axle.\u003c\/li\u003e\n\u003cli\u003eCaliper brackets, installation hardware and braided stainless steel flexlines.\u003c\/li\u003e\n\u003cli\u003eTwo aluminum front hub assemblies, associated bearings\/seals and wheel studs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService caliper\u003c\/th\u003e\n\u003ctd\u003ePowerlite; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor diameter × thickness\u003c\/th\u003e\n\u003ctd\u003e11.38 × 0.81 inches (approximately 289 × 20.6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParking brake\u003c\/th\u003e\n\u003ctd\u003eRear parking-brake parts not part of the front kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFront hub wheel pattern\u003c\/th\u003e\n\u003ctd\u003e4 × 130 mm (four lug); supplied M14 × 1.50 wheel studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts retained and items to supply\u003c\/h2\u003e\u003cp\u003eRetains the compatible original 914 front spindles and the existing spindle nuts and washers specified in DS1567. You supply wheel-compatible lug nuts, a 19 mm master cylinder, brake fluid, bearing grease and installation consumables. Rear brake parts are purchased separately.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1567.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1567 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1567_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. Include photos of the installed front spindles or rear uprights, your wheel details and any known hub or brake conversion. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red \/ GT Slotted","offer_id":44308409417906,"sku":"140-17473-R","price":1994.22,"currency_code":"USD","in_stock":true},{"title":"Red \/ Drilled\/Slotted","offer_id":44308409450674,"sku":"140-17473-DR","price":1954.33,"currency_code":"USD","in_stock":true},{"title":"Black \/ GT Slotted","offer_id":44308409483442,"sku":"140-17473","price":1814.33,"currency_code":"USD","in_stock":true},{"title":"Black \/ Drilled\/Slotted","offer_id":44308409516210,"sku":"140-17473-D","price":1954.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/brake_kit_140-17473-R-xl_f4f42f53-c0b4-4bda-882b-8a9e2abac962.jpg?v=1716321174"},{"product_id":"wilwood-front-brake-kit-for-porsche-914-4-1973-76","title":"Wilwood Front Brake Kit for Porsche 914 (1973–1976) – Powerlite","description":"\u003cp\u003eUpgrade your four-cylinder Porsche 914 with Powerlite four-piston front calipers and 11.38-inch vented rotors. The kit includes new hubs and uses compatible factory front spindles, so a 911 strut conversion is not required.\u003c\/p\u003e\u003cp\u003eThis is the late-car kit, for the 914-4 from model year 1973 through 1976, the last year of production. Early cars built for 1970 through 1972 use a separate kit with their own caliper brackets, and the two bracket sets don't swap. Struts often get swapped between 914s, so if yours may not be original, a photo of the strut and caliper mounting lets us check the match before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePhoto note: \u003c\/strong\u003eSome photographs show earlier plain-face rotors. Current supplied-to-order kits follow the rotor specification in the selected product option.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e914-4\u003c\/td\u003e\n\u003ctd\u003e1973–1976\u003c\/td\u003e\n\u003ctd\u003eBase, four-cylinder\u003c\/td\u003e\n\u003ctd\u003eFactory four-cylinder front spindles; 19 mm master cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eA 19 mm master cylinder is required and is not included. Have the front and rear brake combination checked together before installation.\u003c\/p\u003e\u003cp\u003eFor a factory 914-6, a five-lug conversion or changed struts\/hubs, contact PMB before ordering. The early and late front kits use different mounting brackets.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat is included for both front sides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Powerlite four-piston service-brake calipers in the selected Black or Red finish.\u003c\/li\u003e\n\u003cli\u003eTwo 11.38 × 0.81-inch vented rotors with the rotor adapters\/hats for this application.\u003c\/li\u003e\n\u003cli\u003eBP-10 service-brake pads for both sides of the axle.\u003c\/li\u003e\n\u003cli\u003eCaliper brackets, installation hardware and braided stainless steel flexlines.\u003c\/li\u003e\n\u003cli\u003eTwo aluminum front hub assemblies, associated bearings\/seals and wheel studs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService caliper\u003c\/th\u003e\n\u003ctd\u003ePowerlite; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor diameter × thickness\u003c\/th\u003e\n\u003ctd\u003e11.38 × 0.81 inches (approximately 289 × 20.6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParking brake\u003c\/th\u003e\n\u003ctd\u003eRear parking-brake parts not part of the front kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFront hub wheel pattern\u003c\/th\u003e\n\u003ctd\u003e4 × 130 mm (four lug); supplied M14 × 1.50 wheel studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts retained and items to supply\u003c\/h2\u003e\u003cp\u003eRetains the compatible original 914 front spindles and the existing spindle nuts and washers specified in DS1567. You supply wheel-compatible lug nuts, a 19 mm master cylinder, brake fluid, bearing grease and installation consumables. Rear brake parts are purchased separately.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1567.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1567 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1567_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. Include photos of the installed front spindles or rear uprights, your wheel details and any known hub or brake conversion. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red \/ GT Slotted","offer_id":44308413350066,"sku":"140-17474-R","price":1851.36,"currency_code":"USD","in_stock":true},{"title":"Red \/ Drilled\/Slotted","offer_id":44308413382834,"sku":"140-17474-DR","price":1994.22,"currency_code":"USD","in_stock":true},{"title":"Black \/ GT Slotted","offer_id":44308413415602,"sku":"140-17474","price":1851.36,"currency_code":"USD","in_stock":true},{"title":"Black \/ Drilled\/Slotted","offer_id":44308413448370,"sku":"140-17474-D","price":1994.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/brake_kit_140-17473-R-xl_b8eb20d9-6cf8-410b-974f-8f05a071e01e.jpg?v=1716321291"},{"product_id":"wilwood-forged-narrow-superlite-4r-front-brake-kit-for-porsche-3-strut-911-912-models-1969-89","title":"Wilwood Front Brake Kit for Porsche 911 (1969–1974) – Superlite","description":"\u003cp\u003eUpgrade both front brakes with Wilwood Forged Narrow Superlite 4R four-piston calipers and 12.19-inch (310 mm) vented rotors. The two-piece rotors use aluminum hats and fit the compatible original hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eM-type front struts\u003c\/td\u003e\n\u003ctd\u003e3.00-inch (76.2 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-6\u003c\/td\u003e\n\u003ctd\u003e1970–1971\u003c\/td\u003e\n\u003ctd\u003eFactory six-cylinder\u003c\/td\u003e\n\u003ctd\u003e3.00-inch (76.2 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eMeasure between the centers of the caliper mounting holes, not across the strut tube. Use the mounting distance specified in the table.\u003c\/p\u003e\u003cp\u003eThe 914-6 row applies to the factory six-cylinder front setup; it does not establish fitment for a four-cylinder 914 or a car converted to different struts.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWatch: How to measure your 911 front strut mounts\u003c\/h2\u003e\u003cp\u003eSee where to measure the front caliper mounting holes, then compare the result with the requirement in the fitment table.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MVBqaa9g_FI?rel=0\u0026amp;playsinline=1\" title=\"How To Measure the Strut Mounting Tabs on 1969-89 Porsche 911 for Wilwood Brakes\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch2\u003eWhy choose this configuration?\u003c\/h2\u003e\u003cp\u003eThe 12.19-inch rotor is larger and thicker than the 11.10-inch rotor in the Powerlite front kit. The Superlite caliper also uses a larger 7416-shape pad. This is an option to consider when planning a complete brake upgrade, provided your wheels clear and the front\/rear system is matched; it is not a guarantee of shorter stopping distances.\u003c\/p\u003e\u003ch2\u003eParts supplied for both front sides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Forged Narrow Superlite 4R four-piston calipers in the selected finish.\u003c\/li\u003e\n\u003cli\u003eTwo 12.19 × 1.10-inch vented iron rotors and two aluminum rotor hats.\u003c\/li\u003e\n\u003cli\u003eBP-10 brake pads for both front calipers.\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting brackets, rotor\/hat and caliper hardware, and braided stainless steel flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003eForged Narrow Superlite 4R; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor diameter × thickness\u003c\/th\u003e\n\u003ctd\u003e12.19 × 1.10 inches (nominal 310 × 28 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 7416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper mounting tabs\u003c\/th\u003e\n\u003ctd\u003e3 inches (76.2 mm), center to center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts retained and installation planning\u003c\/h2\u003e\u003cp\u003eThe existing compatible front hubs and struts are reused. A master cylinder, rear brake kit, wheels and brake fluid are not included. Wilwood permits the stock OEM master cylinder for the specified Porsche 911 application, with the installer responsible for the complete system’s brake balance and pedal operation. The factory front dust shields must be removed for this installation and are not reinstalled, as specified in Wilwood’s instructions.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1512.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1512 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1512_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red \/ GT Slotted Rotors","offer_id":44310996451506,"sku":"140-16937-R","price":1565.65,"currency_code":"USD","in_stock":true},{"title":"Red \/ SRP Drilled and Slotted Rotors","offer_id":44310996484274,"sku":"140-16937-DR","price":1708.51,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ GT Slotted Rotors","offer_id":44310996517042,"sku":"140-16937-Y","price":1565.65,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ SRP Drilled and Slotted Rotors","offer_id":44310996549810,"sku":"140-16937-DY","price":1708.51,"currency_code":"USD","in_stock":true},{"title":"Black \/ GT Slotted Rotors","offer_id":44310996385970,"sku":"140-16937","price":1565.65,"currency_code":"USD","in_stock":true},{"title":"Black \/ SRP Drilled and Slotted Rotors","offer_id":44310996418738,"sku":"140-16937-D","price":1708.51,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ GT Slotted Rotors","offer_id":44310996582578,"sku":"140-16937-C","price":2081.08,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ SRP Drilled and Slotted Rotors","offer_id":44310996615346,"sku":"140-16937-DC","price":2223.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-16937-DR_kit-xl.jpg?v=1716400952"},{"product_id":"wilwood-powerlite-front-brake-kit-for-porsche-911-912-models-with-3-struts-1969-76","title":"Wilwood Front Brake Kit for Porsche 911 (1969–1974) – Powerlite","description":"\u003cp\u003eUpgrade both front brakes with Powerlite four-piston calipers, 11.10-inch vented rotors, BP-10 pads and braided flexlines. The kit reuses the compatible original hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eM-type front struts\u003c\/td\u003e\n\u003ctd\u003e3.00-inch (76.2 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-6\u003c\/td\u003e\n\u003ctd\u003e1970–1971\u003c\/td\u003e\n\u003ctd\u003eFactory six-cylinder\u003c\/td\u003e\n\u003ctd\u003e3.00-inch (76.2 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eMeasure between the centers of the caliper mounting holes, not across the strut tube. Use the mounting distance specified in the table.\u003c\/p\u003e\u003cp\u003eThe 914-6 row applies to the factory six-cylinder front setup; it does not establish fitment for a four-cylinder 914 or a car converted to different struts.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWatch: How to measure your 911 front strut mounts\u003c\/h2\u003e\u003cp\u003eSee where to measure the front caliper mounting holes, then compare the result with the requirement in the fitment table.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MVBqaa9g_FI?rel=0\u0026amp;playsinline=1\" title=\"How To Measure the Strut Mounting Tabs on 1969-89 Porsche 911 for Wilwood Brakes\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo forged aluminum Powerlite four-piston calipers, in the selected finish.\u003c\/li\u003e\n\u003cli\u003eTwo one-piece vented rotor\/hat assemblies: HP plain face or SRP drilled and slotted, according to the selected variant.\u003c\/li\u003e\n\u003cli\u003eBP-10 brake pads for both front calipers.\u003c\/li\u003e\n\u003cli\u003eCaliper mounting brackets, installation hardware and braided stainless steel front flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat stays on the car\u003c\/h2\u003e\u003cp\u003eRetains the existing factory front hubs and compatible M-type struts. New hubs, a master cylinder and rear brake parts are not supplied. Brake fluid and installation consumables are separate. The factory front dust shields must be removed for this installation and are not reinstalled, as specified in Wilwood’s instructions.\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003ePowerlite; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor size\u003c\/th\u003e\n\u003ctd\u003e11.10-inch diameter × 0.80-inch thickness (nominal 282 × 20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 7912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount requirement\u003c\/th\u003e\n\u003ctd\u003e3.00-inch (76.2 mm) M-strut caliper tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\u003ch3\u003eHow do I choose between Powerlite and Superlite?\u003c\/h3\u003e\u003cp\u003eThe Powerlite rotor kit uses 11.10-inch rotors. The Superlite kit uses larger 12.19-inch two-piece rotors and a different caliper. Compare the clearance drawings and your planned front\/rear combination before choosing.\u003c\/p\u003e\u003ch3\u003eDoes the kit include both front sides?\u003c\/h3\u003e\u003cp\u003eYes. The kit supplies a pair of calipers, the front axle pad set, mounting brackets and hardware, braided stainless flexlines, and two rotors. It is a front axle kit; rear brakes are purchased separately.\u003c\/p\u003e\u003ch3\u003eCan I keep the original master cylinder?\u003c\/h3\u003e\u003cp\u003eWilwood’s installation instructions permit the stock OEM master cylinder for the specified Porsche 911 application. The installer must assess pedal travel and front-to-rear balance for the actual brake combination; do not assume a modified system has stock behavior.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1518.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1518 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1518_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Black \/ HP Vented Rotors","offer_id":44311070933170,"sku":"140-16946","price":911.36,"currency_code":"USD","in_stock":true},{"title":"Black \/ SRP Drilled and Slotted Rotors","offer_id":44311070965938,"sku":"140-16946-D","price":1054.22,"currency_code":"USD","in_stock":true},{"title":"Red \/ HP Vented Rotors","offer_id":44311070998706,"sku":"140-16946-R","price":911.36,"currency_code":"USD","in_stock":true},{"title":"Red \/ SRP Drilled and Slotted Rotors","offer_id":44311071031474,"sku":"140-16946-DR","price":1054.22,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ HP Vented Rotors","offer_id":44311071064242,"sku":"140-16946-Y","price":911.36,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ SRP Drilled and Slotted Rotors","offer_id":44311071097010,"sku":"140-16946-DY","price":1054.22,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ HP Vented Rotors","offer_id":44311071129778,"sku":"140-16946-C","price":1426.79,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ SRP Drilled and Slotted Rotors","offer_id":44311071162546,"sku":"140-16946-DC","price":1569.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-16946-DY_kit-xl.jpg?v=1716405049"},{"product_id":"wilwood-powerlite-front-caliper-and-bracket-kit-for-porsche-911-912-models-with-3-struts-1969-77","title":"Wilwood Front Caliper Kit for Porsche 911 (1969–1974) – Powerlite","description":"\u003cp\u003eAdd Powerlite four-piston front calipers to compatible, serviceable factory-size rotors. This caliper-and-bracket kit includes pads and braided flexlines for both front wheels; rotors and hubs are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eM-type front struts\u003c\/td\u003e\n\u003ctd\u003e3.00-inch front caliper mounts; serviceable 282 × 20 mm vented rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e914-6\u003c\/td\u003e\n\u003ctd\u003e1970–1971\u003c\/td\u003e\n\u003ctd\u003eFactory six-cylinder\u003c\/td\u003e\n\u003ctd\u003e3.00-inch front caliper mounts; serviceable 282 × 20 mm vented rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eMeasure between the centers of the caliper mounting holes, not across the strut tube. Use the mounting distance specified in the table.\u003c\/p\u003e\u003cp\u003eThe 914-6 row applies to the factory six-cylinder front setup; it does not establish fitment for a four-cylinder 914 or a car converted to different struts.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWatch: How to measure your 911 front strut mounts\u003c\/h2\u003e\u003cp\u003eSee where to measure the front caliper mounting holes, then compare the result with the requirement in the fitment table.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MVBqaa9g_FI?rel=0\u0026amp;playsinline=1\" title=\"How To Measure the Strut Mounting Tabs on 1969-89 Porsche 911 for Wilwood Brakes\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Powerlite four-piston calipers in the selected finish.\u003c\/li\u003e\n\u003cli\u003eBP-10 pads for both front calipers.\u003c\/li\u003e\n\u003cli\u003eCaliper mounting brackets and installation hardware.\u003c\/li\u003e\n\u003cli\u003eBraided stainless steel front flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRequired existing parts\u003c\/h2\u003e\u003cp\u003eUse the compatible original 11.10-inch-diameter, nominal 20 mm-thick vented front rotors and factory hubs specified by Wilwood. Have the rotors checked for condition and service limits. Solid rotors are not a substitute. If you need new rotors with the calipers, choose the separate 140-16946 kit. The factory front dust shields must be removed for this installation and are not reinstalled, as specified in Wilwood’s instructions.\u003c\/p\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003ePowerlite; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotors supplied\u003c\/th\u003e\n\u003ctd\u003eNone; compatible existing vented rotors required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 7912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMount requirement\u003c\/th\u003e\n\u003ctd\u003e3.00-inch (76.2 mm) M-strut caliper tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\u003ch3\u003eIs this a complete rotor kit?\u003c\/h3\u003e\u003cp\u003eNo. It supplies both front calipers, pads, brackets, hardware and flexlines. You supply the compatible serviceable rotors and reuse the original hubs.\u003c\/p\u003e\u003ch3\u003eWill this fit a 3.5-inch strut?\u003c\/h3\u003e\u003cp\u003eNo. This 140-17019 kit is specified for M-type struts with 3.00-inch mounting-tab spacing. Measure before ordering.\u003c\/p\u003e\u003ch3\u003eCan I retain my master cylinder?\u003c\/h3\u003e\u003cp\u003eWilwood allows the stock OEM master cylinder for the specified Porsche 911 installation. Your installer must verify the complete system’s pedal travel and brake balance.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1518.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1518 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1518_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Black","offer_id":44312210636978,"sku":"140-17019","price":732.79,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44312210702514,"sku":"140-17019-R","price":732.79,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":44312210768050,"sku":"140-17019-Y","price":732.79,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation)","offer_id":44312210833586,"sku":"140-17019-C","price":1248.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/140-17019_kit-xl.jpg?v=1716422200"},{"product_id":"wilwood-narrow-dynapro-p-radial-rear-caliper-and-bracket-kit-for-porsche-911-1984-89","title":"Wilwood Rear Caliper Kit for Porsche 911 (1984–1989) – Dynapro","description":"\u003cp\u003eReplace both rear service-brake calipers with Wilwood Narrow Dynapro-P four-piston calipers. This caliper-and-bracket kit includes BP-10 pads and rear braided flexlines; rotors are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1984–1985\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 24 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1984–1989\u003c\/td\u003e\n\u003ctd\u003eCarrera — excludes Turbo Look\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 24 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1989\u003c\/td\u003e\n\u003ctd\u003eCarrera 4 — fitment check required\u003c\/td\u003e\n\u003ctd\u003eContact PMB to check the installed rear hubs and brakes; 964 fitment is not confirmed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1989\u003c\/td\u003e\n\u003ctd\u003eSpeedster\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 24 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eThe 20 mm and 24 mm rear versions are different systems. Match the complete rotor and caliper combination rather than choosing by model year alone.\u003c\/p\u003e\u003cp\u003eTurbo and Turbo Look brake configurations require a separate fitment check.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat is included for the rear axle\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Narrow Dynapro-P radial-mount four-piston calipers, in the selected finish.\u003c\/li\u003e\n\u003cli\u003eBP-10 pads for both rear service-brake calipers.\u003c\/li\u003e\n\u003cli\u003eCaliper mounting brackets, installation hardware and braided stainless steel rear flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003eNarrow Dynapro-P radial mount; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor requirement\u003c\/th\u003e\n\u003ctd\u003e11.42-inch (290 mm) diameter × 0.95 inch (nominal 24 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNew rotors\u003c\/th\u003e\n\u003ctd\u003eNot included; supply compatible serviceable vented rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 4812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts to reuse or supply\u003c\/h2\u003e\u003cp\u003eRetain the compatible factory rear hubs and serviceable 24 mm vented rear rotors. Have the rotor dimensions, condition and service limits checked before installation. Replacement rotors, hubs, a master cylinder, parking-brake parts and brake fluid are not supplied.\u003c\/p\u003e\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\u003ch3\u003eDoes this include both rear sides?\u003c\/h3\u003e\u003cp\u003eYes. Calipers, pads, brackets, installation hardware and rear flexlines are supplied for both rear service brakes. Rotors are not included.\u003c\/p\u003e\u003ch3\u003eDo I need to change the master cylinder?\u003c\/h3\u003e\u003cp\u003eWilwood permits the stock OEM master cylinder for the specified Porsche 911 installation. Confirm the front and rear combination with your installer, who must verify pedal travel and brake balance before use.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1492.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1492 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1492_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red","offer_id":44317025239218,"sku":"140-16678-R","price":1014.86,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":44317025271986,"sku":"140-16678-Y","price":1014.86,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44317025206450,"sku":"140-16678-B","price":1014.86,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation)","offer_id":44317025304754,"sku":"140-16678-C","price":1456.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/pmb-porsche-brake_kit_140-16678-R-xl.jpg?v=1792528722"},{"product_id":"wilwood-narrow-dynapro-p-radial-rear-brake-kit-for-porsche-911-912-models-1969-83","title":"Wilwood Rear Caliper Kit for Porsche 911 (1969–1983) – Dynapro","description":"\u003cp\u003eReplace both rear service-brake calipers with Wilwood Narrow Dynapro-P four-piston calipers. This caliper-and-bracket kit includes BP-10 pads and rear braided flexlines; rotors are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eM-strut model (front-strut designation)\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eS-strut model (front-strut designation)\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1975\u003c\/td\u003e\n\u003ctd\u003eCarrera\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1975–1977\u003c\/td\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1978–1983\u003c\/td\u003e\n\u003ctd\u003eSC\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eThe 20 mm and 24 mm rear versions are different systems. Match the complete rotor and caliper combination rather than choosing by model year alone.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat is included for the rear axle\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Narrow Dynapro-P radial-mount four-piston calipers, in the selected finish.\u003c\/li\u003e\n\u003cli\u003eBP-10 pads for both rear service-brake calipers.\u003c\/li\u003e\n\u003cli\u003eCaliper mounting brackets, installation hardware and braided stainless steel rear flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003eNarrow Dynapro-P radial mount; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor requirement\u003c\/th\u003e\n\u003ctd\u003e11.42-inch (290 mm) diameter × 0.80 inch (nominal 20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNew rotors\u003c\/th\u003e\n\u003ctd\u003eNot included; supply compatible serviceable vented rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 4812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts to reuse or supply\u003c\/h2\u003e\u003cp\u003eRetain the compatible factory rear hubs and serviceable 20 mm vented rear rotors. Have the rotor dimensions, condition and service limits checked before installation. Replacement rotors, hubs, a master cylinder, parking-brake parts and brake fluid are not supplied.\u003c\/p\u003e\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\u003ch3\u003eDoes this include both rear sides?\u003c\/h3\u003e\u003cp\u003eYes. Calipers, pads, brackets, installation hardware and rear flexlines are supplied for both rear service brakes. Rotors are not included.\u003c\/p\u003e\u003ch3\u003eDo I need to change the master cylinder?\u003c\/h3\u003e\u003cp\u003eWilwood permits the stock OEM master cylinder for the specified Porsche 911 installation. Confirm the front and rear combination with your installer, who must verify pedal travel and brake balance before use.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1479.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1479 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1479_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red","offer_id":44317417504946,"sku":"140-16676-R","price":941.43,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":44317417537714,"sku":"140-16676-Y","price":941.43,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44317417570482,"sku":"140-16676","price":941.43,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation)","offer_id":44317417603250,"sku":"140-16676-C","price":1456.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/brake_kit_140-16676-R-xl_dc5d20e6-5dbf-4e41-a2b5-89fb96436948.jpg?v=1716500081"},{"product_id":"wilwood-narrow-dynapro-p-radial-rear-brake-kit-for-porsche-911-912-models-1969-84","title":"Wilwood Rear Brake Kit for Porsche 911 (1969–1983) – Dynapro","description":"\u003cp\u003eRefresh both rear service brakes with Wilwood Narrow Dynapro-P four-piston calipers, new 11.42-inch (290 mm) vented rotors, BP-10 pads and rear braided flexlines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eM-strut model (front-strut designation)\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eS-strut model (front-strut designation)\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1975\u003c\/td\u003e\n\u003ctd\u003eCarrera\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1975–1977\u003c\/td\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1978–1983\u003c\/td\u003e\n\u003ctd\u003eSC\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 20 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eThe 20 mm and 24 mm rear versions are different systems. Match the complete rotor and caliper combination rather than choosing by model year alone.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat is included for the rear axle\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Narrow Dynapro-P radial-mount four-piston calipers, in the selected finish.\u003c\/li\u003e\n\u003cli\u003eTwo 11.42-inch (290 mm) one-piece vented rotor\/hat assemblies in the selected surface pattern.\u003c\/li\u003e\n\u003cli\u003eBP-10 pads for both rear service-brake calipers.\u003c\/li\u003e\n\u003cli\u003eCaliper mounting brackets, installation hardware and braided stainless steel rear flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003eNarrow Dynapro-P radial mount; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor requirement\u003c\/th\u003e\n\u003ctd\u003e11.42-inch (290 mm) diameter × 0.80 inch (nominal 20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNew rotors\u003c\/th\u003e\n\u003ctd\u003eTwo, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 4812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts retained\u003c\/h2\u003e\u003cp\u003eThe compatible original rear hubs are reused. This is a service-brake kit, without replacement hubs, parking-brake cables, a master cylinder or brake fluid. The installer should check the condition and operation of the car’s parking-brake system during the work.\u003c\/p\u003e\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\u003ch3\u003eDoes this include both rear sides?\u003c\/h3\u003e\u003cp\u003eYes. Calipers, pads, brackets, installation hardware and rear flexlines are supplied for both rear service brakes. Two new rotors are also included.\u003c\/p\u003e\u003ch3\u003eDo I need to change the master cylinder?\u003c\/h3\u003e\u003cp\u003eWilwood permits the stock OEM master cylinder for the specified Porsche 911 installation. Confirm the front and rear combination with your installer, who must verify pedal travel and brake balance before use.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1479.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1479 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1479_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red \/ HP Vented Rotors","offer_id":44317417701554,"sku":"140-16680-R","price":1055.71,"currency_code":"USD","in_stock":true},{"title":"Red \/ GT Slotted Rotors","offer_id":44320392020146,"sku":"140-17002-R","price":1098.57,"currency_code":"USD","in_stock":true},{"title":"Red \/ SRP Drilled and Slotted","offer_id":44317452271794,"sku":"140-16680-DR","price":1198.57,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ HP Vented Rotors","offer_id":44317417734322,"sku":"140-16680-Y","price":1055.71,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ GT Slotted Rotors","offer_id":44320392052914,"sku":"140-17002-Y","price":1098.57,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ SRP Drilled and Slotted","offer_id":44317452304562,"sku":"140-16680-DY","price":1198.57,"currency_code":"USD","in_stock":true},{"title":"Black \/ HP Vented Rotors","offer_id":44317417767090,"sku":"140-16680","price":1055.71,"currency_code":"USD","in_stock":true},{"title":"Black \/ GT Slotted Rotors","offer_id":44320392085682,"sku":"140-17002","price":1098.57,"currency_code":"USD","in_stock":true},{"title":"Black \/ SRP Drilled and Slotted","offer_id":44317452337330,"sku":"140-16680-D","price":1198.57,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ HP Vented Rotors","offer_id":44317417799858,"sku":"140-16680-C","price":1571.14,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ GT Slotted Rotors","offer_id":44320392118450,"sku":"140-17002-C","price":1614.0,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ SRP Drilled and Slotted","offer_id":44317452370098,"sku":"140-16680-DC","price":1714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/brake_kit_140-16680-DR-xl.jpg?v=1716501777"},{"product_id":"wilwood-forged-narrow-superlite-4r-front-brake-kit-for-porsche-911s-911sc-and-carrera-models-with-3-5-struts-1969-89","title":"Wilwood Front Brake Kit for Porsche 911 (1969–1989) – Superlite","description":"\u003cp\u003eUpgrade both front brakes with Wilwood Forged Narrow Superlite 4R four-piston calipers and 12.19-inch (310 mm) vented rotors. The two-piece rotors use aluminum hats and fit the compatible original hubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003ctd\u003eS-type front struts\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1975\u003c\/td\u003e\n\u003ctd\u003eCarrera\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1975–1977\u003c\/td\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1978–1983\u003c\/td\u003e\n\u003ctd\u003eSC\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1984–1985\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1984–1989\u003c\/td\u003e\n\u003ctd\u003eCarrera — excludes Turbo Look\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1989\u003c\/td\u003e\n\u003ctd\u003eCarrera 4 — fitment check required\u003c\/td\u003e\n\u003ctd\u003eContact PMB to check the installed struts and hubs; 964 fitment is not confirmed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1989\u003c\/td\u003e\n\u003ctd\u003eSpeedster\u003c\/td\u003e\n\u003ctd\u003e3.50-inch (88.9 mm) front caliper mounts; compatible factory hubs and struts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eMeasure between the centers of the caliper mounting holes, not across the strut tube. Use the mounting distance specified in the table.\u003c\/p\u003e\u003cp\u003eTurbo and Turbo Look brake configurations are not covered by this listing.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWatch: How to measure your 911 front strut mounts\u003c\/h2\u003e\u003cp\u003eSee where to measure the front caliper mounting holes, then compare the result with the requirement in the fitment table.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MVBqaa9g_FI?rel=0\u0026amp;playsinline=1\" title=\"How To Measure the Strut Mounting Tabs on 1969-89 Porsche 911 for Wilwood Brakes\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch2\u003eWhy choose this configuration?\u003c\/h2\u003e\u003cp\u003eThe 12.19-inch rotor is larger and thicker than the 11.10-inch rotor in the Powerlite front kit. The Superlite caliper also uses a larger 7416-shape pad. This is an option to consider when planning a complete brake upgrade, provided your wheels clear and the front\/rear system is matched; it is not a guarantee of shorter stopping distances.\u003c\/p\u003e\u003ch2\u003eParts supplied for both front sides\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Forged Narrow Superlite 4R four-piston calipers in the selected finish.\u003c\/li\u003e\n\u003cli\u003eTwo 12.19 × 1.10-inch vented iron rotors and two aluminum rotor hats.\u003c\/li\u003e\n\u003cli\u003eBP-10 brake pads for both front calipers.\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting brackets, rotor\/hat and caliper hardware, and braided stainless steel flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003eForged Narrow Superlite 4R; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor diameter × thickness\u003c\/th\u003e\n\u003ctd\u003e12.19 × 1.10 inches (nominal 310 × 28 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 7416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper mounting tabs\u003c\/th\u003e\n\u003ctd\u003e3.5 inches (88.9 mm), center to center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts retained and installation planning\u003c\/h2\u003e\u003cp\u003eThe existing compatible front hubs and struts are reused. A master cylinder, rear brake kit, wheels and brake fluid are not included. Wilwood permits the stock OEM master cylinder for the specified Porsche 911 application, with the installer responsible for the complete system’s brake balance and pedal operation. The factory front dust shields must be removed for this installation and are not reinstalled, as specified in Wilwood’s instructions.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1512.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1512 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1512_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red \/ GT Slotted Rotors","offer_id":44320412631218,"sku":"140-16947-R","price":1565.65,"currency_code":"USD","in_stock":true},{"title":"Red \/ SRP Drilled and Slotted Rotors","offer_id":44320412663986,"sku":"140-16947-DR","price":1708.51,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ GT Slotted Rotors","offer_id":44320412696754,"sku":"140-16947-Y","price":1565.65,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ SRP Drilled and Slotted Rotors","offer_id":44320412729522,"sku":"140-16947-DY","price":1708.51,"currency_code":"USD","in_stock":true},{"title":"Black \/ GT Slotted Rotors","offer_id":44320412762290,"sku":"140-16947","price":1565.65,"currency_code":"USD","in_stock":true},{"title":"Black \/ SRP Drilled and Slotted Rotors","offer_id":44320412795058,"sku":"140-16947-D","price":1708.51,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ GT Slotted Rotors","offer_id":44320412827826,"sku":"140-16947-C","price":2081.08,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ SRP Drilled and Slotted Rotors","offer_id":44320412860594,"sku":"140-16947-DC","price":2223.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/pmb-porsche-140-16947-DR_kit-xl.jpg?v=1792528756"},{"product_id":"wilwood-narrow-dynapro-p-radial-rear-brake-kit-for-porsche-911-1984-89","title":"Wilwood Rear Brake Kit for Porsche 911 (1984–1989) – Dynapro","description":"\u003cp\u003eRefresh both rear service brakes with Wilwood Narrow Dynapro-P four-piston calipers, new 11.42-inch (290 mm) vented rotors, BP-10 pads and rear braided flexlines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom color orders: \u003c\/strong\u003ePMB will confirm your requested finish before the order is finalized.\u003c\/p\u003e\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVehicle fitment and required brake configuration\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePorsche model\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eVersion \/ application\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRequired brake setup\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1984–1985\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 24 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1984–1989\u003c\/td\u003e\n\u003ctd\u003eCarrera — excludes Turbo Look\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 24 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1989\u003c\/td\u003e\n\u003ctd\u003eCarrera 4 — fitment check required\u003c\/td\u003e\n\u003ctd\u003eContact PMB to check the installed rear hubs and brakes; 964 fitment is not confirmed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003e1989\u003c\/td\u003e\n\u003ctd\u003eSpeedster\u003c\/td\u003e\n\u003ctd\u003eCompatible factory rear hubs\/uprights; 290 × 24 mm rear-brake configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cp\u003eMatch the brakes and suspension actually fitted to the car. Changed struts, hubs, uprights or previous brake conversions need a separate fitment check.\u003c\/p\u003e\u003cp\u003eThe 20 mm and 24 mm rear versions are different systems. Match the complete rotor and caliper combination rather than choosing by model year alone.\u003c\/p\u003e\u003cp\u003eTurbo and Turbo Look brake configurations require a separate fitment check.\u003c\/p\u003e\u003cp\u003eA 15-inch wheel may clear, but diameter alone is not enough. Compare the exact wheel’s barrel and spokes with the wheel-clearance drawing before ordering.\u003c\/p\u003e\u003ch2\u003eWhat is included for the rear axle\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo Narrow Dynapro-P radial-mount four-piston calipers, in the selected finish.\u003c\/li\u003e\n\u003cli\u003eTwo 11.42-inch (290 mm) one-piece vented rotor\/hat assemblies in the selected surface pattern.\u003c\/li\u003e\n\u003cli\u003eBP-10 pads for both rear service-brake calipers.\u003c\/li\u003e\n\u003cli\u003eCaliper mounting brackets, installation hardware and braided stainless steel rear flexlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003ccaption\u003eKit specifications\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCaliper\u003c\/th\u003e\n\u003ctd\u003eNarrow Dynapro-P radial mount; four pistons per caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRotor requirement\u003c\/th\u003e\n\u003ctd\u003e11.42-inch (290 mm) diameter × 0.95 inch (nominal 24 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNew rotors\u003c\/th\u003e\n\u003ctd\u003eTwo, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePad compound\u003c\/th\u003e\n\u003ctd\u003eBP-10; pad shape 4812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eParts retained\u003c\/h2\u003e\u003cp\u003eThe compatible original rear hubs are reused. This is a service-brake kit, without replacement hubs, parking-brake cables, a master cylinder or brake fluid. The installer should check the condition and operation of the car’s parking-brake system during the work.\u003c\/p\u003e\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\u003ch3\u003eDoes this include both rear sides?\u003c\/h3\u003e\u003cp\u003eYes. Calipers, pads, brackets, installation hardware and rear flexlines are supplied for both rear service brakes. Two new rotors are also included.\u003c\/p\u003e\u003ch3\u003eDo I need to change the master cylinder?\u003c\/h3\u003e\u003cp\u003eWilwood permits the stock OEM master cylinder for the specified Porsche 911 installation. Confirm the front and rear combination with your installer, who must verify pedal travel and brake balance before use.\u003c\/p\u003e\u003ch2\u003eInstallation Documents\u003c\/h2\u003e\u003cp\u003eInstallation instructions and clearance drawings open in a new tab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds1492.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilwood DS1492 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Images\/BrakeKits\/WCD_Drawings\/WCD_dwg-Large\/ds1492_wcd-lg.jpg\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWheel clearance drawing for this kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeed help matching your Porsche?\u003c\/h2\u003e\u003cp\u003eSend PMB your model and year, photos of the existing brakes, and any known suspension changes. For front kits, include the caliper mounting-tab measurement; for rear kits, include the rotor thickness. \u003ca href=\"https:\/\/pmbperformance.com\/pages\/contact-us\"\u003eContact PMB for help choosing the correct kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWatch: Wilwood Disc Brakes overview\u003c\/h2\u003e\u003cp\u003eSee how Wilwood designs and manufactures its brake components.\u003c\/p\u003e\u003cdiv style=\"width:100%;aspect-ratio:16\/9\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oEdAhm4Ikpg?rel=0\u0026amp;playsinline=1\" title=\"Wilwood Disc Brakes overview\" width=\"560\" height=\"315\" style=\"width:100%;height:100%;border:0\" loading=\"lazy\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eCalifornia warning, applicable to brake pads only:\u003c\/strong\u003e Cancer and Reproductive Harm. \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Red \/ HP Vented Rotors","offer_id":47562239934642,"sku":"140-16682-R","price":1138.06,"currency_code":"USD","in_stock":true},{"title":"Red \/ SRP Drilled and Slotted","offer_id":47562240000178,"sku":"140-16682-DR","price":1292.06,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ HP Vented Rotors","offer_id":47562240032946,"sku":"140-16682-Y","price":1138.06,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ SRP Drilled and Slotted","offer_id":47562240098482,"sku":"140-16682-DY","price":1292.06,"currency_code":"USD","in_stock":true},{"title":"Black \/ HP Vented Rotors","offer_id":47562240131250,"sku":"140-16682","price":1138.06,"currency_code":"USD","in_stock":true},{"title":"Black \/ SRP Drilled and Slotted","offer_id":47562240196786,"sku":"140-16682-D","price":1292.06,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ HP Vented Rotors","offer_id":47562240229554,"sku":"140-16682-C","price":1571.14,"currency_code":"USD","in_stock":true},{"title":"Custom (our sales associate will reach out to you for confirmation) \/ SRP Drilled and Slotted","offer_id":47562240295090,"sku":"140-16682-DC","price":1714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/pmb-porsche-brake_kit_140-16682-DR-xl.jpg?v=1792529054"},{"product_id":"wilwood-270-6513ubls","title":"Wilwood Rear Starlite 55 Wide 5 Hub, Black, Long Studs, Without Races","description":"\u003cp\u003eThis black E-coated Wilwood Starlite 55 rear hub carries a Wide 5 wheel on a 5 x 10.25-inch bolt circle. Its 5\/8-11 coarse studs extend 1.38 inches beyond the standard stud length, and bearing races are not included. Wilwood Engineering was founded by Bill Wood in 1977 and is based in Camarillo, California. Its disc-brake systems and components include calipers, brake rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized applications, with each component selected for the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6513UBLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black E-Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle position:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud configuration:\u003c\/strong\u003e Extended 5\/8-11 studs; 1.38 inches longer than standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing races:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting bolt circle:\u003c\/strong\u003e 8 x 7.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.200 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck the rear hub, spindle, bearing seats, and 5 x 10.25-inch wheel bolt circle together. The 5\/8-11 studs are 1.38 inches longer than the standard version; verify wheel and lug-nut engagement rather than choosing by vehicle model alone.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6513UBLS\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePMB Performance brings over 20 years of experience with brake components and fitment. Send us the installed kit number and relevant measurements if you need help confirming this part.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700916715698,"sku":"270-6513UBLS","price":204.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-6513UBLS-xl.jpg?v=1792076104"},{"product_id":"wilwood-270-6513ud","title":"Wilwood Rear Wide 5 Starlite 55 Hub with Drilled Studs, Races Excluded","description":"\u003cp\u003eDrilled coarse-thread wheel studs distinguish this bare-aluminum Starlite 55 rear hub from the solid-stud versions. It supports a 5 x 10.25-inch wide-five wheel and is supplied without the bearing races needed to complete the hub assembly. Wilwood Engineering began in 1977 under founder Bill Wood and is based in Camarillo, California. The company designs and manufactures disc brakes, including calipers, brake rotors, master cylinders, valves, fittings, and brake lines for motorsport, street-performance, and specialized uses. Individual parts must be matched to the rest of the brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6513UD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud style:\u003c\/strong\u003e Drilled, 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing races:\u003c\/strong\u003e Excluded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor attachment:\u003c\/strong\u003e 8 x 7.00-inch bolt circle; standard offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eThis rear hub must be matched to the race-car spindle and the correct cup-and-cone bearing combination. Confirm the standard rotor offset and eight-hole, 7.00-inch rotor mounting circle before transferring any brake components.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6513UD\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eHave a question about the hardware already on your vehicle? PMB Performance can help compare the part and mounting requirements, backed by over 20 years of brake and fitment experience.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700916846770,"sku":"270-6513UD","price":171.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Wide_5_Starlite_55-xl.jpg?v=1792076105"},{"product_id":"wilwood-270-6513uls","title":"Wilwood Rear Starlite 55 Hub, Bare Aluminum, Extended Studs, No Races","description":"\u003cp\u003eFor a Starlite 55 rear hub assembly requiring extra stud reach, this Wilwood hub has coarse wheel studs 1.38 inches longer than standard. Its uncoated aluminum finish and race-free configuration separate it from the black-coated and assembled-race versions. Bill Wood established Wilwood Engineering in 1977. Based in Camarillo, California, the company makes disc-brake systems and components for motorsport, street-performance and specialized uses, including brake calipers and rotors, hydraulic master cylinders, valves, fittings and lines. System requirements determine the appropriate component combination.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6513ULS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Rear axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended stud length:\u003c\/strong\u003e 1.38 inches longer than standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRace provision:\u003c\/strong\u003e Supplied without bearing races\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor bolt pattern:\u003c\/strong\u003e 8 x 7.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.200 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm that the wheel uses the 5 x 10.25-inch mounting pattern and that the longer studs suit the wheel center and lug nuts. Bearing and rotor compatibility must be established from the complete rear hub assembly, not the vehicle make.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6513ULS\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBefore ordering for a modified assembly, send PMB Performance the kit number and relevant component details. Our over 20 years of experience can help you confirm the correct combination.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700916912306,"sku":"270-6513ULS","price":186.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-6513ULS-xl.jpg?v=1792076106"},{"product_id":"wilwood-270-6732","title":"Wilwood Rear Starlite 55 Standard Drive Flange with Mounting Bolts","description":"\u003cp\u003eThis standard-weight Starlite 55 drive flange transfers axle drive to a compatible five-bolt wide-five rear hub. Its 24-spline aluminum flange is supplied with the end plate, end-plate screws, Grade-8 mounting bolts, and hardened washers. Part of Wilwood Engineering's disc brake component range, this item should be matched to its intended brake-system configuration. Founded in 1977 by Bill Wood, the Camarillo, California company designs and manufactures calipers, brake rotors, master cylinders, valves, fittings, and brake lines for motorsport, street-performance, and specialized applications.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6732\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle interface:\u003c\/strong\u003e 24 splines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange construction:\u003c\/strong\u003e 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e End plate and screws, Grade-8 drive bolts, hardened washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.300 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange attachment:\u003c\/strong\u003e five bolts on 3.98-inch circle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the axle spline and five-bolt Starlite 55 flange interface before ordering. The included attachment hardware distinguishes this kit from the less-bolts version; it is not a replacement wheel hub or a universal axle flange.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6732\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eFor help matching the component to your assembly, contact PMB Performance with the brake-kit details and dimensions. Our team has over 20 years of experience working through parts and fitment questions.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700916945074,"sku":"270-6732","price":94.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Starlite_55_Drive_Flange_std-xl.jpg?v=1792076107"},{"product_id":"wilwood-270-6732l","title":"Wilwood Standard Starlite 55 Rear Drive Flange without Attachment Bolts","description":"\u003cp\u003eA black-anodized Starlite 55 drive flange is supplied here for installations where the flange attachment bolts will be sourced separately. The standard-weight, 24-spline component includes its end plate and screws, but not the bolts that secure the flange to the hub. From its base in Camarillo, California, Wilwood Engineering designs and manufactures disc brake systems for motorsport, street-performance, and specialized applications. Bill Wood founded the company in 1977. Its range covers brake calipers, rotors, master cylinders, valves, fittings, and lines, which are selected according to the needs of the complete system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6732L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline count:\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy:\u003c\/strong\u003e 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e End plate with screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcluded:\u003c\/strong\u003e Flange attachment bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.100 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange attachment:\u003c\/strong\u003e five bolts on 3.98-inch circle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eUse only with the corresponding five-bolt Starlite 55 rear hub and compatible axle spline. Select the correct flange bolts and washers for that assembly; do not confuse the included small end-plate screws with the omitted drive bolts.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6732L\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eContact PMB Performance with the existing part identification and brake-system configuration for selection assistance. We draw on over 20 years of experience with parts and fitment.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700916977842,"sku":"270-6732L","price":81.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-6732L-xl.jpg?v=1792076108"},{"product_id":"wilwood-270-6733","title":"Wilwood Rear Lightweight Starlite 55 Drive Flange and Bolt Kit","description":"\u003cp\u003eThis lightweight Wilwood Starlite 55 drive flange uses a 24-spline axle connection and Type III anodized aluminum construction. Its supplied end plate, screws, Grade 8 drive bolts and hardened washers form the flange hardware package. From its base in Camarillo, California, Wilwood Engineering designs and manufactures disc-brake components and systems. Founded by Bill Wood in 1977, it serves motorsport, street-performance and specialized applications with calipers, rotors, master cylinders, valves, fittings and brake lines that must be selected as part of a matched braking system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6733\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Type III anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpline engagement:\u003c\/strong\u003e 24-spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange material:\u003c\/strong\u003e 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit contents:\u003c\/strong\u003e Drive flange, end plate and screws, Grade-8 drive bolts, hardened washers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange attachment:\u003c\/strong\u003e five bolts on 3.98-inch circle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm the 24-spline axle and the five-bolt hub interface, and select this lightweight configuration only where it matches the intended racing assembly. The standard-weight flange and lightweight flange are separate product configurations.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6733\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance’s team has over 20 years of experience with brake parts and fitment. If the assembly is uncertain, contact us with its part numbers, measurements and vehicle details.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917207218,"sku":"270-6733","price":99.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Starlite_55_Drive_Flange-xl.jpg?v=1792076110"},{"product_id":"wilwood-270-6733l","title":"Wilwood Lightweight Starlite 55 Drive Flange, Rear, Less Mounting Bolts","description":"\u003cp\u003eThis lightweight Starlite 55 flange is the less-drive-bolts version for a compatible wide-five rear hub. The aluminum flange retains the 24-spline axle connection and Type III-anodized finish, with an end plate and screws supplied for the outer closure. For Wilwood Engineering's motorsport, street-performance, and specialized applications, component selection follows the requirements of the complete brake system. The company was founded by Bill Wood in 1977 and is based in Camarillo, California, where its business focuses on designing and manufacturing disc brake systems, calipers, rotors, master cylinders, valves, fittings, and lines.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6733L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Type III anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e 24-spline axle, five-bolt hub flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 7075-T6 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied:\u003c\/strong\u003e End plate and its screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot supplied:\u003c\/strong\u003e Flange attachment bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange attachment:\u003c\/strong\u003e five bolts on 3.98-inch circle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFlange attachment bolts must be selected separately for the five-bolt hub. Verify the axle spline, installed flange configuration, and required hardware before assembly; the end-plate screws do not attach the flange to the hub.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6733L\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePMB Performance has over 20 years of experience helping customers select brake-system parts. Share the existing assembly information so we can help you check the details before ordering.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917239986,"sku":"270-6733L","price":91.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-6733L-xl.jpg?v=1792076110"},{"product_id":"wilwood-270-6735bc","title":"Wilwood Front Starlite 55 Wide 5 Hub, Black, Coarse Studs and Snap-Cap","description":"\u003cp\u003eThe black E-coated Starlite 55 front hub from Wilwood combines a Wide 5 wheel mount with coarse-thread studs and a Snap-Cap. It accepts direct rotor attachment on an 8 x 7.00-inch bolt circle. The manufacturer, Wilwood Engineering, was established in 1977 by Bill Wood and is based in Camarillo, California. It produces disc-brake systems and the calipers, rotors, master cylinders, valves, fittings and lines used within them. Motorsport, street-performance and specialized applications each require a suitable combination of those components.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6735BC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black E-Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud configuration:\u003c\/strong\u003e Standard coarse-thread studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub closure:\u003c\/strong\u003e Snap-Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting circle:\u003c\/strong\u003e 8 x 7.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0431 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0432 (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eThe wheel mounting circle is 5 x 10.25 inches and the studs are 5\/8-11. Verify the front spindle and bearing requirements as well as the 8 x 7.00-inch rotor bolt circle; this hub is not identified by a road-car model alone.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6735BC\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eWith over 20 years of experience, PMB Performance can help work through the dimensions and component requirements. Provide the installed kit information when requesting a fitment check.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917305522,"sku":"270-6735BC","price":228.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Wide_5_Starlite_55_Front_blk-xl.jpg?v=1792076111"},{"product_id":"wilwood-270-6735bd","title":"Wilwood Front Wide 5 Hub, Starlite 55, Black with Drilled Studs","description":"\u003cp\u003eDrilled 5\/8-11 studs and a black E-coated finish identify this Wilwood front Starlite 55 hub. The Snap-Cap closes the hub snout, and the wheel and rotor attach on separate Wide 5 and eight-bolt patterns. Wilwood Engineering was founded by Bill Wood in 1977 and is based in Camarillo, California. Its disc-brake systems and components include calipers, brake rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized applications, with each component selected for the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6735BD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black E-Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud construction:\u003c\/strong\u003e Drilled coarse-thread studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure style:\u003c\/strong\u003e Snap-Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor interface:\u003c\/strong\u003e 8 x 7.00-inch bolt circle, standard offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0431 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0432 (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCompare the drilled 5\/8-11 stud configuration with the existing hub rather than substituting by finish alone. The wheel circle is 5 x 10.25 inches, while the rotor attaches on an 8 x 7.00-inch circle; these are different mounting interfaces.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6735BD\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance brings over 20 years of experience with brake components and fitment. Send us the installed kit number and relevant measurements if you need help confirming this part.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917371058,"sku":"270-6735BD","price":237.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Wide_5_Starlite_55_Front_blk-xl_ccfd5278-962f-48ac-a153-2056ed63354b.jpg?v=1792076112"},{"product_id":"wilwood-270-6735bls","title":"Wilwood Front Starlite 55 Hub with Long Coarse Studs, Black E-Coat","description":"\u003cp\u003eWilwood equips this black Starlite 55 front hub with wheel studs that are 1.38 inches longer than standard. The aluminum Wide 5 hub retains the Snap-Cap configuration and direct eight-bolt rotor mount. Founded in 1977 by Bill Wood, Wilwood Engineering designs and manufactures disc-brake systems from Camarillo, California. Its range of calipers, rotors, master cylinders, valves, fittings and brake lines serves motorsport, street-performance and specialized applications. Individual parts must be matched to the requirements of the complete system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6735BLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black E-Coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle position:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub cap:\u003c\/strong\u003e Snap-Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud extension:\u003c\/strong\u003e 1.38 inches beyond standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor attachment circle:\u003c\/strong\u003e 8 x 7.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.900 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0431 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0432 (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck wheel-center thickness and lug-nut engagement against the additional 1.38 inches of stud length. Confirm the front spindle, bearing seats, and rotor mounting dimensions before using this hub in a custom racing brake package.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6735BLS\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHave a question about the hardware already on your vehicle? PMB Performance can help compare the part and mounting requirements, backed by over 20 years of brake and fitment experience.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917403826,"sku":"270-6735BLS","price":251.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-6735BLS-xl.jpg?v=1792076113"},{"product_id":"wilwood-270-6735c","title":"Wilwood Bare Front Starlite 55 Wide 5 Hub with Snap-Cap and Coarse Studs","description":"\u003cp\u003eThis bare-aluminum Starlite 55 front hub carries the standard 5\/8-11 coarse-thread studs and Snap-Cap closure. It is a wide-five racing hub rather than a vehicle-specific original-equipment replacement, with wheel and rotor interfaces that must both match the build. The complete brake installation determines which Wilwood component is appropriate. Wilwood Engineering designs and manufactures disc brake systems, calipers, rotors, master cylinders, valves, fittings, and brake lines for motorsport, street-performance, and specialized applications. Bill Wood founded the company in 1977, and it is based in Camarillo, California.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6735C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub position:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel studs:\u003c\/strong\u003e Standard coarse-thread configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e Snap-Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting:\u003c\/strong\u003e 8 x 7.00 inches, standard offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0431 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0432 (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm a 5 x 10.25-inch wheel bolt circle and the appropriate front spindle bearings. The standard-offset rotor mounting face uses an eight-hole, 7.00-inch circle; wheel bolt spacing by itself does not establish brake compatibility.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6735C\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eBefore ordering for a modified assembly, send PMB Performance the kit number and relevant component details. Our over 20 years of experience can help you confirm the correct combination.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917436594,"sku":"270-6735C","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Wide_5_Starlite_55_Front-xl.jpg?v=1792076114"},{"product_id":"wilwood-270-6735d","title":"Wilwood Front Starlite 55 Hub, Drilled Coarse Studs, Bare Aluminum","description":"\u003cp\u003eThe drilled-stud version of Wilwood’s bare Starlite 55 front hub serves Wide 5 racing wheel assemblies. A Snap-Cap closes the bearing cavity while the hub provides a separate direct-mount flange for the brake rotor. Camarillo, California is home to Wilwood Engineering, founded by Bill Wood in 1977. The company designs and manufactures complete disc-brake systems and parts, from calipers and rotors to master cylinders, valves, fittings and brake lines, for motorsport, street-performance and specialized applications. Selection depends on the complete brake-system configuration.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6735D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Front wide-five racing hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud type:\u003c\/strong\u003e Drilled coarse-thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap arrangement:\u003c\/strong\u003e Snap-Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor bolt circle:\u003c\/strong\u003e 8 x 7.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0431 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0432 (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the 5\/8-11 stud thread and 5 x 10.25-inch wheel pattern, then check bearing and rotor dimensions separately. Confirm that the installed hub calls for drilled studs and the Snap-Cap front closure rather than a rear drive flange.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6735D\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eFor help matching the component to your assembly, contact PMB Performance with the brake-kit details and dimensions. Our team has over 20 years of experience working through parts and fitment questions.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917469362,"sku":"270-6735D","price":219.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Wide_5_Starlite_55_Front-xl_9d1bb02e-0c00-4c69-9091-2a54f2811e2a.jpg?v=1792076115"},{"product_id":"wilwood-270-6735ls","title":"Wilwood Front Long-Stud Starlite 55 Snap-Cap Hub - Bare Aluminum","description":"\u003cp\u003eThe long-stud, bare-finish Starlite 55 hub is intended for a wide-five front wheel assembly. It retains the Snap-Cap front closure while extending the coarse-thread wheel studs 1.38 inches beyond the standard configuration. Founded by Bill Wood in 1977 and based in Camarillo, California, Wilwood Engineering designs and manufactures disc brake systems and components. Its calipers, brake rotors, master cylinders, valves, fittings, and brake lines serve motorsport, street-performance, and specialized applications, with each component selected for the requirements of the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6735LS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting position:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud specification:\u003c\/strong\u003e 5\/8-11; 1.38-inch extension over standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub closure type:\u003c\/strong\u003e Snap-Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mount:\u003c\/strong\u003e 8 x 7.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.900 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0431 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0432 (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eUse the actual wheel center and lug nuts to confirm the required stud reach. Also match the front hub bearing seats, spindle, and 8 x 7.00-inch rotor attachment circle; the extended studs do not change those compatibility checks.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6735LS\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eContact PMB Performance with the existing part identification and brake-system configuration for selection assistance. We draw on over 20 years of experience with parts and fitment.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917502130,"sku":"270-6735LS","price":233.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-6735LS-xl.jpg?v=1792076116"},{"product_id":"wilwood-270-6735ud","title":"Wilwood Front Starlite 55 Hub without Races, Drilled Studs and Snap-Cap","description":"\u003cp\u003eThis Starlite 55 front hub combines drilled coarse-thread studs with a bare finish and omits the bearing races. It is the front Snap-Cap configuration for a matching wide-five assembly, allowing the required bearing cups to be selected separately. Wilwood Engineering began in 1977 under founder Bill Wood and is based in Camarillo, California. The company designs and manufactures disc brakes, including calipers, brake rotors, master cylinders, valves, fittings, and brake lines for motorsport, street-performance, and specialized uses. Individual parts must be matched to the rest of the brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6735UD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 10.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStuds:\u003c\/strong\u003e Drilled 5\/8-11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing races:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap style:\u003c\/strong\u003e Snap-Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0431 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor mounting bolt circle:\u003c\/strong\u003e 8 x 7.00 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFit the correct inner and outer races and bearings for the front spindle. Check the 5 x 10.25-inch wheel circle, 5\/8-11 studs and 8 x 7.00-inch rotor pattern as separate interfaces.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl537.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL537 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/Flyers\/fl90.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood FL90 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6735UD\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance’s team has over 20 years of experience with brake parts and fitment. If the assembly is uncertain, contact us with its part numbers, measurements and vehicle details.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917534898,"sku":"270-6735UD","price":191.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Wide_5_Starlite_55_Front-xl_c7de646b-1e4a-4271-9ba9-e7fc2a66928c.jpg?v=1792076117"},{"product_id":"wilwood-270-6913","title":"Wilwood Front Starlite 55 Snap-Cap Hub Dust Cover","description":"\u003cp\u003eThe Wilwood Snap-Cap closes the front of a compatible Starlite 55 hub using the groove inside the hub snout. Its reinforced nylon construction and O-ring sealing arrangement make it a specific hub closure rather than a universal push-in cap. Wilwood Engineering has designed and manufactured disc-brake systems since Bill Wood founded the company in 1977. Its Camarillo, California operation supplies calipers, rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized uses. Matching individual components to the full brake system remains essential.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6913\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e Press-in Snap-Cap, retained in hub groove\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing arrangement:\u003c\/strong\u003e O-ring seal; match the hub groove\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eInspect the hub snout and confirm that it is the Starlite 55 Snap-Cap design. A bolt-on drive-flange cover or a screw-on street-hub cap is not an interchangeable closure; the retaining groove and seal arrangement must match.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6913\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePMB Performance has over 20 years of experience helping customers select brake-system parts. Share the existing assembly information so we can help you check the details before ordering.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917567666,"sku":"270-6913","price":24.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-6913-xl.jpg?v=1792076118"},{"product_id":"wilwood-270-6918","title":"Wilwood Rear Starlite 55 Lightweight Drive-Flange Dust Cover","description":"\u003cp\u003eThis Wilwood cover closes the lightweight Starlite 55 drive flange and carries the Wilwood logo. Its three-hole attachment uses a 3 x 2-inch mounting circle, distinct from the five-bolt flange-to-hub connection. The manufacturer, Wilwood Engineering, was established in 1977 by Bill Wood and is based in Camarillo, California. It produces disc-brake systems and the calipers, rotors, master cylinders, valves, fittings and lines used within them. Motorsport, street-performance and specialized applications each require a suitable combination of those components.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6918\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent:\u003c\/strong\u003e Drive-flange dust cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Lightweight Starlite 55 rear drive flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover mounting pattern:\u003c\/strong\u003e Three holes on a 2-inch bolt circle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm that the rear drive flange is the lightweight Starlite 55 version and compare its cover attachment pattern. Use the appropriate cover hardware and sealing arrangement for that flange rather than selecting a cap by hub diameter alone.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6918\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eWith over 20 years of experience, PMB Performance can help work through the dimensions and component requirements. Provide the installed kit information when requesting a fitment check.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917698738,"sku":"270-6918","price":9.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Starlite_55_Drive_Flange_Dust_Cap-xl.jpg?v=1792076119"},{"product_id":"wilwood-270-6989","title":"Wilwood Front Hat-Mount Hub for Pinto and Mustang II, 2.060-Inch N Dimension","description":"\u003cp\u003eWilwood’s forged aluminum hat-mount hub locates a separate rotor hat on the matching Pinto or Mustang II front spindle arrangement. This version has a 2.060-inch drawing dimension N and dual 5 x 4.50\/4.75-inch wheel patterns. Wilwood Engineering was founded by Bill Wood in 1977 and is based in Camarillo, California. Its disc-brake systems and components include calipers, brake rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized applications, with each component selected for the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-6989\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded components:\u003c\/strong\u003e Bearing races and screw-on aluminum cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0882 \/ A12 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 2.060 inches; compare the complete hub drawing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the spindle bearings and full hub drawing to the brake kit. Three 1\/4-20 holes retain the hat using bolt kit 230-7032; the different 1.630-inch-N hub is not interchangeable solely because the wheel pattern matches.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-6989\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance brings over 20 years of experience with brake components and fitment. Send us the installed kit number and relevant measurements if you need help confirming this part.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917731506,"sku":"270-6989","price":164.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Big_Brake-xl.jpg?v=1792076121"},{"product_id":"wilwood-270-7037","title":"Wilwood Front Hat-Mount Hub for Chevrolet Brake Conversions","description":"\u003cp\u003eThe Wilwood hat-mount front hub provides a dual-pattern wheel flange for selected Chevrolet brake conversions. A separate rotor hat seats on the aluminum hub and is retained by three 1\/4-20 fasteners. Founded in 1977 by Bill Wood, Wilwood Engineering designs and manufactures disc-brake systems from Camarillo, California. Its range of calipers, rotors, master cylinders, valves, fittings and brake lines serves motorsport, street-performance and specialized applications. Individual parts must be matched to the requirements of the complete system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7037\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded components:\u003c\/strong\u003e Bearing races and screw-on aluminum cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 2.370 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck the complete spindle and hub drawing, especially dimension N at 2.370 inches. Wilwood’s application references differ between Chevrolet model groups, so confirm the exact brake kit before ordering this replacement hub.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7037\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eHave a question about the hardware already on your vehicle? PMB Performance can help compare the part and mounting requirements, backed by over 20 years of brake and fitment experience.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917797042,"sku":"270-7037","price":164.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Big_Brake-xl_03b74902-7af7-461d-9020-eb86e00a5881.jpg?v=1792076122"},{"product_id":"wilwood-270-7274","title":"Wilwood Front Vented-Rotor Offset Hub for Chevrolet, Adapter Mount","description":"\u003cp\u003eFor a Chevrolet front brake assembly using a vented rotor and intermediate adapter, this Wilwood aluminum hub provides the required vented-rotor offset arrangement. It has 5 x 4.50-inch and 5 x 4.75-inch wheel patterns plus a screw-on cap. Bill Wood established Wilwood Engineering in 1977. Based in Camarillo, California, the company makes disc-brake systems and components for motorsport, street-performance and specialized uses, including brake calipers and rotors, hydraulic master cylinders, valves, fittings and lines. System requirements determine the appropriate component combination.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7274\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter patterns:\u003c\/strong\u003e 6 x 6.25 in; 8 x 7.00 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter options:\u003c\/strong\u003e 300-3307 for 6 x 6.25-inch pattern; 300-3099 for 8 x 7.00-inch pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck the actual spindle and kit parts list before selection. Match the adapter, rotor width and bearing package; the solid-rotor hub differs in its mounting geometry.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7274\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eBefore ordering for a modified assembly, send PMB Performance the kit number and relevant component details. Our over 20 years of experience can help you confirm the correct combination.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917829810,"sku":"270-7274","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Pro_Street-xl.jpg?v=1792076122"},{"product_id":"wilwood-270-7275","title":"Wilwood Front Solid-Rotor Offset Hub for Chevrolet Brake Assemblies","description":"\u003cp\u003eThis Wilwood front hub is machined for the solid-rotor offset arrangement used in selected Chevrolet brake assemblies. Its direct\/adapter mounting configuration differs from the vented-rotor hub despite sharing the same two wheel bolt circles. Camarillo, California is home to Wilwood Engineering, founded by Bill Wood in 1977. The company designs and manufactures complete disc-brake systems and parts, from calipers and rotors to master cylinders, valves, fittings and brake lines, for motorsport, street-performance and specialized applications. Selection depends on the complete brake-system configuration.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7275\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the Chevrolet spindle, A6\/A2 bearing arrangement and installed brake kit to the hub drawing. DS-719 identifies the solid-rotor layout separately from the vented version; confirm the rotor mounting method and caliper alignment before ordering.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7275\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eFor help matching the component to your assembly, contact PMB Performance with the brake-kit details and dimensions. Our team has over 20 years of experience working through parts and fitment questions.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917862578,"sku":"270-7275","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl.jpg?v=1792076124"},{"product_id":"wilwood-270-7276","title":"Wilwood Front Vented-Rotor Hub for Ford Pinto\/Mustang II Spindles","description":"\u003cp\u003ePinto\/Mustang II spindle-based brake conversions use this Wilwood front hub with a vented-rotor mounting adapter. The bare aluminum hub separates the wheel mounting surface from the rotor so the adapter can establish the required brake offset. This component comes from Wilwood Engineering, the disc brake manufacturer established by Bill Wood in 1977 and based in Camarillo, California. Its design and manufacturing range includes calipers, brake rotors, master cylinders, valves, fittings, and brake lines for motorsport, street-performance, and specialized applications. Selection depends on the requirements of the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7276\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter patterns:\u003c\/strong\u003e 6 x 6.25 in; 8 x 7.00 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdapter selection:\u003c\/strong\u003e 300-3307: 6 x 6.25 inches; 300-3099: 8 x 7.00 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0882 \/ A12 set (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eChoose an adapter with the correct six- or eight-bolt rotor pattern and confirm the full rotor\/caliper layout. Suitable spindle and bearing dimensions are required in addition to the 5 x 4.50-inch or 5 x 4.75-inch wheel pattern. Do not substitute the solid-offset version without checking geometry.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7276\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eContact PMB Performance with the existing part identification and brake-system configuration for selection assistance. We draw on over 20 years of experience with parts and fitment.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917895346,"sku":"270-7276","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Pro_Street-xl_3175e6a5-9a7b-439a-8139-d84dc7980fa2.jpg?v=1792076125"},{"product_id":"wilwood-270-7277","title":"Wilwood Front Solid-Rotor Hub for Pinto and Mustang II Spindles","description":"\u003cp\u003eWilwood’s solid-rotor front hub supports direct or adapter-based rotor arrangements on the matching Pinto\/Mustang II spindle. The 5 x 4.50\/4.75-inch wheel flange does not establish rotor fit by itself; the hub offset is specific to this configuration. From its base in Camarillo, California, Wilwood Engineering designs and manufactures disc-brake components and systems. Founded by Bill Wood in 1977, it serves motorsport, street-performance and specialized applications with calipers, rotors, master cylinders, valves, fittings and brake lines that must be selected as part of a matched braking system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7277\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0882 \/ A12 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFor the matching Pinto\/Mustang II front spindle and solid-rotor brake package. Compare the hub drawing and bearing journals, then follow the complete kit instructions for direct rotor attachment or the specified mounting adapter.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7277\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance’s team has over 20 years of experience with brake parts and fitment. If the assembly is uncertain, contact us with its part numbers, measurements and vehicle details.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700917928114,"sku":"270-7277","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl_daffb51d-628d-41a7-a96e-5a51ff4efd2a.jpg?v=1792076126"},{"product_id":"wilwood-270-7279","title":"Wilwood Front Vented-Rotor Conversion Hub for Early Ford Spindles","description":"\u003cp\u003eThis Wilwood conversion hub adapts the matching early Ford front spindle to a vented-rotor brake assembly. The aluminum hub’s 4.120-inch M dimension and dedicated bearing arrangement distinguish it from later Ford spindle hubs. Wilwood Engineering has designed and manufactured disc-brake systems since Bill Wood founded the company in 1977. Its Camarillo, California operation supplies calipers, rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized uses. Matching individual components to the full brake system remains essential.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7279\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter patterns:\u003c\/strong\u003e 6 x 6.25 in; 8 x 7.00 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter options:\u003c\/strong\u003e 300-3307 six-bolt; 300-3099 eight-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-1561 (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension M:\u003c\/strong\u003e 4.120 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCompare the early Ford spindle against Wilwood’s dimensional sheet. Select the corresponding rotor adapter and confirm wheel-pattern, bearing and seal compatibility as a complete assembly.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7279\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance has over 20 years of experience helping customers select brake-system parts. Share the existing assembly information so we can help you check the details before ordering.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918026418,"sku":"270-7279","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Pro_Street-xl_4a279252-c9ed-4429-a44b-f0dd86e23b89.jpg?v=1792076127"},{"product_id":"wilwood-270-7283","title":"Wilwood Front Vented-Brake Hub for Chevrolet (1955-1957)","description":"\u003cp\u003eThe 1955-1957 Chevrolet spindle application of this Wilwood front hub uses an intermediate adapter to mount a vented rotor. Its bare aluminum construction and two five-lug wheel bolt circles are specified for a custom brake assembly rather than an integral replacement rotor. Wilwood's range extends from calipers and brake rotors to master cylinders, valves, fittings, and brake lines, all selected to meet the requirements of a complete brake system. Founded by Bill Wood in 1977, Wilwood Engineering is based in Camarillo, California and designs and manufactures disc brake systems for motorsport, street-performance, and specialized uses.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7283\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter patterns:\u003c\/strong\u003e 6 x 6.25 in; 8 x 7.00 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the original or replacement spindle dimensions and bearings on the car. Choose rotor adapter 300-3307 or 300-3099 to suit the rotor attachment pattern, and check brake offset before fitting the caliper. The hub alone does not supply the complete braking system.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7283\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eWith over 20 years of experience, PMB Performance can help work through the dimensions and component requirements. Provide the installed kit information when requesting a fitment check.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918059186,"sku":"270-7283","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Pro_Street-xl_da811f30-b1ce-4c16-8215-7fa0259363bc.jpg?v=1792076128"},{"product_id":"wilwood-270-7285","title":"Wilwood Front Solid-Rotor Hub for Ford Mustang (1987–1993)","description":"\u003cp\u003eWilwood supplies this front hub for solid-rotor brake configurations built around the specified 1987–1993 Mustang spindle. The hub carries a 5 x 4.50\/4.75-inch wheel flange and uses the Mustang-specific bearing and seal dimensions. Wilwood Engineering was founded by Bill Wood in 1977 and is based in Camarillo, California. Its disc-brake systems and components include calipers, brake rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized applications, with each component selected for the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7285\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-2609 \/ A5 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0882 \/ A12 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm the 1987–1993 Mustang spindle, A5 inner\/A12 outer bearings and solid-rotor configuration. Use the mounting arrangement documented for that complete brake kit; matching a five-lug wheel pattern does not establish hub interchangeability.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7285\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance brings over 20 years of experience with brake components and fitment. Send us the installed kit number and relevant measurements if you need help confirming this part.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918091954,"sku":"270-7285","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl_2638bb5d-57c8-42a6-94f0-9238a0ed2ed1.jpg?v=1792076129"},{"product_id":"wilwood-270-7309","title":"Wilwood Front GM G-Body Hub for Vented-Rotor Adapters (1980–1987)","description":"\u003cp\u003eThis Wilwood front wheel hub is configured for a vented-rotor brake layout on the specified 1980-1987 GM G-Body spindle. A separate adapter joins the rotor to the hub, while dual bolt circles provide the listed five-lug wheel mounting choices. Wilwood Engineering began in 1977 under founder Bill Wood and is based in Camarillo, California. The company designs and manufactures disc brakes, including calipers, brake rotors, master cylinders, valves, fittings, and brake lines for motorsport, street-performance, and specialized uses. Individual parts must be matched to the rest of the brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7309\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter patterns:\u003c\/strong\u003e 6 x 6.25 in; 8 x 7.00 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0933 \/ A34 set (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck the actual G-Body spindle and bearing dimensions, including any aftermarket spindle changes. Rotor adapter options are 300-3307 for the six-bolt pattern and 300-3099 for the eight-bolt pattern. Match the offset to the caliper bracket rather than selecting only by vehicle year.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7309\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eHave a question about the hardware already on your vehicle? PMB Performance can help compare the part and mounting requirements, backed by over 20 years of brake and fitment experience.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918124722,"sku":"270-7309","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Pro_Street-xl_71f01179-1be5-4d14-855b-35f952f04706.jpg?v=1792076130"},{"product_id":"wilwood-270-7310","title":"Wilwood Front Solid-Rotor Offset Wheel Hub for GM G-Body (1980–1987)","description":"\u003cp\u003eThe solid-rotor version of this Wilwood front hub establishes the mounting geometry for an adapter-based GM G-Body brake assembly. It retains the dual five-lug wheel pattern while using a different brake offset from the vented-rotor hub. Bill Wood founded Wilwood Engineering in 1977; the company is based in Camarillo, California. Wilwood designs and manufactures disc brake systems, from calipers and brake rotors to master cylinders, valves, fittings, and brake lines. Its motorsport, street-performance, and specialized components are chosen to suit the complete braking installation.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7310\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0933 \/ A34 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eUse with the specified 1980–1987 GM G-Body spindle and A6\/A34 bearings. Compare the solid-rotor hub dimensions and complete kit drawing before selecting the rotor attachment components. The vented-offset hub has different geometry.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7310\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eBefore ordering for a modified assembly, send PMB Performance the kit number and relevant component details. Our over 20 years of experience can help you confirm the correct combination.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918157490,"sku":"270-7310","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl_d54d0d45-7718-4082-95e0-79ac58fb8c0a.jpg?v=1792076131"},{"product_id":"wilwood-270-7466","title":"Wilwood Front Hat-Mount Brake Conversion Hub for Ford Granada","description":"\u003cp\u003eA separate rotor hat attaches to this Wilwood front hub for the specified Ford Granada spindle. The hub is forged aluminum with two five-lug wheel patterns and a three-hole hat-retention arrangement. Camarillo, California is home to Wilwood Engineering, founded by Bill Wood in 1977. The company designs and manufactures complete disc-brake systems and parts, from calipers and rotors to master cylinders, valves, fittings and brake lines, for motorsport, street-performance and specialized applications. Selection depends on the complete brake-system configuration.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7466\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied with hub:\u003c\/strong\u003e Bearing races and screw-on aluminum cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0882 \/ A12 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 1.720 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eVerify the Granada spindle and bearing sizes against the hub drawing, including dimension N at 1.720 inches. Match the rotor hat and use the specified 1\/4-20 retention fasteners.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7466\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eFor help matching the component to your assembly, contact PMB Performance with the brake-kit details and dimensions. Our team has over 20 years of experience working through parts and fitment questions.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918190258,"sku":"270-7466","price":172.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Big_Brake-xl_ddc29e51-146b-4628-83bf-089df13908ba.jpg?v=1792076132"},{"product_id":"wilwood-270-7631","title":"Wilwood Front Hat-Mount Hub for Chevrolet Tri-Five (1955–1957)","description":"\u003cp\u003eThe hat-mount Wilwood hub for 1955–1957 Chevrolet Tri-Five front assemblies places the brake rotor on a separate aluminum hat. Its 1.520-inch N dimension identifies this geometry apart from the adapter-mounted vented-rotor hub. Wilwood Engineering’s disc-brake range covers calipers, brake rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized systems. Bill Wood founded the company in 1977, and its base is Camarillo, California. Each part is chosen to suit the operating and installation requirements of the whole brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-7631\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Bearing races and screw-on aluminum cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 1.520 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the Tri-Five spindle and rotor-hat package to the complete dimensional drawing. Confirm the hat sits squarely on the hub and uses the specified three 1\/4-20 retention screws.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-7631\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eContact PMB Performance with the existing part identification and brake-system configuration for selection assistance. We draw on over 20 years of experience with parts and fitment.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918223026,"sku":"270-7631","price":180.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Big_Brake-xl_2911b9da-9b4c-44f3-bb85-b06fcdaea8cd.jpg?v=1792076133"},{"product_id":"wilwood-270-8769","title":"Wilwood Front Solid-Rotor Hub for Mopar A-Body 10-Inch Drum Spindles (1965–1975)","description":"\u003cp\u003eThis Wilwood solid-rotor-offset front hub is machined for the 10-inch drum-brake spindle used in the specified 1965-1975 Mopar A-Body applications. The drum-brake reference identifies the spindle being converted, not a drum supplied with the hub. Wilwood Engineering, founded in 1977 by Bill Wood, is based in Camarillo, California and designs and manufactures disc brake systems and components. Calipers, brake rotors, master cylinders, valves, fittings, and brake lines form part of its range for motorsport, street-performance, and specialized installations; suitability depends on the full brake-system arrangement.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-8769\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm the specified 1965–1975 Mopar A-Body application retains its 10-inch drum spindle. Match the A6\/A2 bearings and solid-rotor mounting arrangement to the kit instructions; the 9-inch drum and disc spindles require different hubs.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-8769\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance’s team has over 20 years of experience with brake parts and fitment. If the assembly is uncertain, contact us with its part numbers, measurements and vehicle details.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918255794,"sku":"270-8769","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl_d5646e5d-1ae4-4857-b319-12c208c0200d.jpg?v=1792076134"},{"product_id":"wilwood-270-8773","title":"Wilwood Front Hub for Mopar A-Body 9-Inch Drum Spindles, Solid Rotor (1965-1972)","description":"\u003cp\u003eA 9-inch drum-brake spindle requires this specific Wilwood A-Body front hub when building the corresponding solid-rotor conversion. Its spindle fit differs from the hub intended for 10-inch drums, despite sharing the same two five-lug wheel bolt circles. For Wilwood Engineering's motorsport, street-performance, and specialized applications, component selection follows the requirements of the complete brake system. The company was founded by Bill Wood in 1977 and is based in Camarillo, California, where its business focuses on designing and manufacturing disc brake systems, calipers, rotors, master cylinders, valves, fittings, and lines.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-8773\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-3147 \/ A4 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-1239 \/ A1 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eIdentify the 9-inch drum spindle on the specified 1965–1972 Mopar A-Body application before ordering. Check its A4 inner\/A1 outer bearings and the solid-rotor kit drawing. Do not substitute the 10-inch drum-spindle hub by wheel pattern alone.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-8773\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance has over 20 years of experience helping customers select brake-system parts. Share the existing assembly information so we can help you check the details before ordering.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918321330,"sku":"270-8773","price":173.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl_b6659407-2fea-47c9-804e-9aea64c83860.jpg?v=1792076135"},{"product_id":"wilwood-270-8775","title":"Wilwood Front Vented-Rotor Hub for Mopar A-Body Disc Spindles (1973–1976)","description":"\u003cp\u003eDesigned around the 1973-1976 Mopar A-Body disc-brake spindle application, this Wilwood hub supports an adapter-mounted vented rotor. It is the vented-offset option for the conversion and should be selected with the intended rotor and caliper bracket geometry. Wilwood Engineering designs and manufactures complete disc brake systems as well as calipers, brake rotors, master cylinders, valves, fittings, and brake lines. Based in Camarillo, California, it was founded by Bill Wood in 1977. The range serves motorsport, street-performance, and specialized applications, requiring each part to be matched to the system in which it operates.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-8775\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter patterns:\u003c\/strong\u003e 6 x 6.25 in; 8 x 7.00 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter options:\u003c\/strong\u003e 300-3307 six-bolt \/ 300-3099 eight-bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 2.310 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eConfirm that the vehicle retains the specified disc-brake spindle. Compare the 2.310-inch N dimension and bearing sizes, then match the vented rotor and adapter to the complete conversion kit.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-8775\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eWith over 20 years of experience, PMB Performance can help work through the dimensions and component requirements. Provide the installed kit information when requesting a fitment check.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918386866,"sku":"270-8775","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Pro_Street-xl_6f911528-4d6e-4219-a3c7-5fdbcb0f8fdf.jpg?v=1792076136"},{"product_id":"wilwood-270-8777","title":"Wilwood Front Hub for 1973–1976 Mopar A-Body Disc Spindles, Solid-Rotor Offset","description":"\u003cp\u003eThis front Wilwood hub combines the 1973–1976 Mopar A-Body disc-spindle bearing arrangement with solid-rotor offset geometry. It is a conversion component for the matching Wilwood brake assembly, rather than a complete brake kit. Wilwood Engineering was founded by Bill Wood in 1977 and is based in Camarillo, California. Its disc-brake systems and components include calipers, brake rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized applications, with each component selected for the complete brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-8777\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 2.020 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck the 1973–1976 A-Body disc spindle, A13\/A2 bearing arrangement and 2.020-inch N dimension on the hub drawing. Confirm the direct-mount or adapter-based solid rotor and its alignment with the caliper using the complete kit instructions.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-8777\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance brings over 20 years of experience with brake components and fitment. Send us the installed kit number and relevant measurements if you need help confirming this part.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918419634,"sku":"270-8777","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl_559a65a2-29a3-4c04-8050-5a0205a841d3.jpg?v=1792076137"},{"product_id":"wilwood-270-8779","title":"Wilwood Front Mopar B-Body Drum-Spindle Hub for Vented Rotors (1962–1972)","description":"\u003cp\u003eAn A6 inner bearing and A2 outer bearing locate this aluminum Wilwood front hub on the specified 1962–1972 Mopar B-Body drum spindle. Its vented-rotor offset works with a separate rotor adapter, providing the hub portion of a matched brake conversion rather than a complete brake assembly. Founded in 1977 by Bill Wood, Wilwood Engineering designs and manufactures disc-brake systems from Camarillo, California. Its range of calipers, rotors, master cylinders, valves, fittings and brake lines serves motorsport, street-performance and specialized applications. Individual parts must be matched to the requirements of the complete system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-8779\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter patterns:\u003c\/strong\u003e 6 x 6.25 in; 8 x 7.00 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotor adapter choices:\u003c\/strong\u003e 300-3307 or 300-3099, selected to match the rotor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eVerify the B-Body drum spindle and bearing journals, particularly if the suspension has already been modified. Choose the six- or eight-bolt adapter needed by the rotor and check caliper alignment. A matching wheel pattern does not verify the hub-to-spindle fit.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-8779\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eHave a question about the hardware already on your vehicle? PMB Performance can help compare the part and mounting requirements, backed by over 20 years of brake and fitment experience.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918452402,"sku":"270-8779","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Pro_Street-xl_41894b76-ba40-47e0-8286-ebdba5231c99.jpg?v=1792076138"},{"product_id":"wilwood-270-8781","title":"Wilwood Front Mopar B-Body Conversion Hub, Solid-Rotor Offset (1962–1972)","description":"\u003cp\u003eA 2.020-inch N dimension sets the solid-rotor location on this Wilwood Mopar B-Body front conversion hub. The bare aluminum body accepts the A6\/A2 bearing arrangement for its specified drum spindle and provides both 5 x 4.50-inch and 5 x 4.75-inch wheel patterns. Bill Wood established Wilwood Engineering in 1977. Based in Camarillo, California, the company makes disc-brake systems and components for motorsport, street-performance and specialized uses, including brake calipers and rotors, hydraulic master cylinders, valves, fittings and lines. System requirements determine the appropriate component combination.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-8781\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0879 \/ A6 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0877 \/ A2 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 2.020 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumented solid-rotor arrangement:\u003c\/strong\u003e 0.35-inch solid rotor, mounted directly or with adapter 300-3307 as specified in DS-719\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFor the matched 1962–1972 Mopar B-Body drum-spindle conversion with solid-rotor geometry. Compare the 2.020-inch N dimension, A6\/A2 bearings and rotor mounting arrangement. The related vented-rotor hub uses different geometry.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-8781\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eBefore ordering for a modified assembly, send PMB Performance the kit number and relevant component details. Our over 20 years of experience can help you confirm the correct combination.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918485170,"sku":"270-8781","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Drag_Race-xl_f5a153f3-5e85-4307-8dc2-4c77bf0fabee.jpg?v=1792076138"},{"product_id":"wilwood-270-9320","title":"Wilwood Front Hat-Mount Hub for Ford Mustang (1970-1973), A13\/A12 Bearings","description":"\u003cp\u003eThis Wilwood Mustang front hub is the hat-mount configuration specified for A13 inner and A12 outer bearing sets. It gives the 1970-1973 spindle application a separate wheel hub and brake-hat interface, with both listed five-lug wheel patterns. Wilwood's range extends from calipers and brake rotors to master cylinders, valves, fittings, and brake lines, all selected to meet the requirements of a complete brake system. Founded by Bill Wood in 1977, Wilwood Engineering is based in Camarillo, California and designs and manufactures disc brake systems for motorsport, street-performance, and specialized uses.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-9320\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded components:\u003c\/strong\u003e Bearing races and screw-on aluminum cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0882 \/ A12 set (fitment reference)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck the bearing series against the installed spindle; a second Mustang hub uses different bearings despite similar outside dimensions. Select the brake hat and verify its rotor position. Three 1\/4-20 retention holes use kit 230-7032; bearing rollers and brake parts must be matched separately.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-9320\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eFor help matching the component to your assembly, contact PMB Performance with the brake-kit details and dimensions. Our team has over 20 years of experience working through parts and fitment questions.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918517938,"sku":"270-9320","price":160.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Big_Brake-xl_0725c14f-db14-4826-aae9-7f6dcbed4032.jpg?v=1792076139"},{"product_id":"wilwood-270-9380","title":"Wilwood Short Screw-On Front Hub Dust Cap with O-Ring","description":"\u003cp\u003eThis short Wilwood screw-on dust cap closes the bearing cavity on the compatible forged aluminum front hub. The supplied O-ring provides sealing and tension at the threaded connection. Wilwood Engineering’s disc-brake range covers calipers, brake rotors, master cylinders, valves, fittings and brake lines for motorsport, street-performance and specialized systems. Bill Wood founded the company in 1977, and its base is Camarillo, California. Each part is chosen to suit the operating and installation requirements of the whole brake system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-9380\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded seal:\u003c\/strong\u003e O-ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap drawing dimension:\u003c\/strong\u003e 0.890 inch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eFor hub 270-9486; confirm its cap thread and the available spindle-nut clearance. Compare the 0.890-inch cap drawing dimension before substituting for a taller cap.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-9380\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eContact PMB Performance with the existing part identification and brake-system configuration for selection assistance. We draw on over 20 years of experience with parts and fitment.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918550706,"sku":"270-9380","price":48.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/270-9380-xl.jpg?v=1792076141"},{"product_id":"wilwood-270-9486","title":"Wilwood Front Pinto\/Mustang II Hat-Mount Hub, 1.630-Inch N Dimension","description":"\u003cp\u003eA 1.630-inch N drawing dimension distinguishes this Wilwood Pinto\/Mustang II hat-mount front hub. The rotor uses a separate hat retained by three screws, while the wheel mounts to either of the two five-lug patterns. From its base in Camarillo, California, Wilwood Engineering designs and manufactures disc-brake components and systems. Founded by Bill Wood in 1977, it serves motorsport, street-performance and specialized applications with calipers, rotors, master cylinders, valves, fittings and brake lines that must be selected as part of a matched braking system.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-9486\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5 x 4.75 in; 5 x 4.50 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel stud thread:\u003c\/strong\u003e 1\/2-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap application:\u003c\/strong\u003e Short screw-on cap 270-9380\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub drawing dimensions:\u003c\/strong\u003e H: 1.810 inches; M: 3.150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner bearing specification:\u003c\/strong\u003e 370-0884 \/ A13 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter bearing specification:\u003c\/strong\u003e 370-0882 \/ A12 set (fitment reference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrawing dimension N:\u003c\/strong\u003e 1.630 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eCheck the spindle and bearing fit as well as the complete hub drawing. Do not interchange with the 2.060-inch-N version without confirming the rotor-hat and caliper position required by the brake kit.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/PDF\/DataSheets\/ds719.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWilwood DS719 technical document\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-9486\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance’s team has over 20 years of experience with brake parts and fitment. If the assembly is uncertain, contact us with its part numbers, measurements and vehicle details.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918583474,"sku":"270-9486","price":164.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Big_Brake-xl_397f1a4f-531a-43a1-a828-c41386001a36.jpg?v=1792076142"},{"product_id":"wilwood-270-9498","title":"Wilwood Starlite 55 Bolt-On Steel Front Hub Dust Cover, Five-Bolt","description":"\u003cp\u003eThis plated-steel Wilwood dust cover closes a Starlite 55 rear-type hub when that hub is configured for front-wheel use. The five-bolt cover attaches at the drive-flange opening, replacing the need for an axle drive flange at a non-driven front hub. Bill Wood founded Wilwood Engineering in 1977; the company is based in Camarillo, California. Wilwood designs and manufactures disc brake systems, from calipers and brake rotors to master cylinders, valves, fittings, and brake lines. Its motorsport, street-performance, and specialized components are chosen to suit the complete braking installation.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 270-9498\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover attachment:\u003c\/strong\u003e 5 x 3.98-inch bolt circle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover thickness:\u003c\/strong\u003e 0.045 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.200 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eMatch the Starlite 55 five-bolt cover interface before ordering. The cover attachment pattern is 5 x 3.98 inches and must not be confused with the wheel bolt circle. Confirm the complete front hub, bearings and spindle arrangement for the conversion.\u003c\/p\u003e\u003ch3\u003eManufacturer Documents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.wilwood.com\/Hubs\/HubProd.aspx?itemno=270-9498\" target=\"_blank\" rel=\"noopener\"\u003eWilwood product information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe photograph represents the product family. Match the ordered configuration using the part number and specifications above.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003ePMB Performance has over 20 years of experience helping customers select brake-system parts. Share the existing assembly information so we can help you check the details before ordering.\u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":67700918616242,"sku":"270-9498","price":11.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/files\/Starlite_55_Front_Dust_Cap_5blt-xl.jpg?v=1792076143"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0521\/8792\/2610\/collections\/pmb-porsche-brake_kit_140-16947-D-xl.jpg?v=1792608759","url":"https:\/\/pmbperformance.com\/collections\/wilwood.oembed?page=285","provider":"PMB Performance","version":"1.0","type":"link"}